Ad
related to: 1.37 length in inches chart conversion
Search results
Results From The WOW.Com Content Network
35 mm film is a film gauge used in filmmaking, and the film standard. [1] In motion pictures that record on film, 35 mm is the most commonly used gauge. The name of the gauge is not a direct measurement, and refers to the nominal width of the 35 mm format photographic film, which consists of strips 1.377 ± 0.001 inches (34.976 ± 0.025 mm) wide.
The height can make a substantial difference to the measured diameter. [3]In the United States, DBH is typically measured at 4.5 ft (1.37 m) above ground.
Length of an average flea is 1–10 mm (usually <5 mm) [27] 2.54 mm One-tenth inch; distance between pins in DIP (dual-inline-package) electronic components 5.70 mm Diameter of the projectile in 5.56×45mm NATO ammunition 10 −2: 1 centimeter 20 mm Approximate width of an adult human finger: 54 mm × 86 mm
A good example of this a 4×6 print (6 inch wide by 4 inch tall landscape) perfectly matches the 3:2 aspect ratio of a DSLR/35 mm, since 6/2=3 and 4/2=2. For analog projection of photographic slides, projector and screen use a 1:1 aspect ratio, supporting horizontal and vertical orientation equally well.
Wine was measured with units based on the wine gallon of 231 cubic inches (3.785 L), while beer was measured with units based on an ale gallon of 282 cubic inches (4.621 L) and grain was measured with the Winchester measure, with a gallon of approximately 268.8 cubic inches (one eighth of a Winchester bushel or 4.405 L). In 1824, these units ...
This is a list of firearm cartridges which have bullets in the 12 millimetres (0.47 in) to 12.99 millimetres (0.511 in) caliber range.. Length refers to the cartridge case length.
The No. 10 envelope is the standard business envelope size in the United States. [6] PWG 5101.1 [7] also lists the following even inch sizes for envelopes: 6 × 9, 7 × 9, 9 × 11, 9 × 12, 10 × 13, 10 × 14 and 10 × 15. Envelopes accepted by the U.S. Postal Service for mailing at the price of a letter must be: Rectangular
HM Motor Gun Boat 501 was a motor gunboat operated by Royal Navy Coastal Forces during the Second World War.The design, prepared by Bill Holt of the DNC's Boat Section, was unusual for a British light coastal forces' boat at the time in that it was of composite construction, whereas most MTBs and Motor Launches were entirely wooden-hulled.