Ad
related to: explain diode as a switch
Search results
Results From The WOW.Com Content Network
An active-low OR diode logic gate is formed by a keypad containing diodes at each switch, all connected to a shared pull-up resistor. When no switch is closed, the pull-up keeps the output high. But when the switch for any key connects to ground, the output goes low. This OR result can be used as an interrupt signal to indicate that any key has ...
Various semiconductor diodes. Left: A four-diode bridge rectifier.Next to it is a 1N4148 signal diode.On the far right is a Zener diode.In most diodes, a white or black painted band identifies the cathode into which electrons will flow when the diode is conducting.
The diode can be treated as switch that conducts significantly only when forward biased and is otherwise effectively disconnected (high impedance). Specific diode types that can change switching state quickly, such as the Schottky diode and the 1N4148, are called "switching diodes". Vacuum tubes can be used in high voltage applications.
A PIN diode switch can switch much more quickly (e.g., 1 microsecond), although at lower RF frequencies it isn't reasonable to expect switching times in the same order of magnitude as the RF period. For example, the capacitance of an "off"-state discrete PIN diode might be 1 pF. At 320 MHz, the capacitive reactance of 1 pF is 497 ohms:
Schottky diode (hot carrier diode) – super fast diode with lower forward voltage drop Zener diode – allows current to flow "backwards" when a specific set voltage is reached. Transient voltage suppression diode (TVS), unipolar or bipolar – used to absorb high-voltage spikes
A silicon-controlled switch (SCS) behaves nearly the same way as an SCR; but there are a few differences. Unlike an SCR, an SCS switches off when a positive voltage/input current is applied to another anode gate lead. Unlike an SCR, an SCS can be triggered into conduction when a negative voltage/output current is applied to that same lead.
Reverse voltage blocking device, commonly modeled as a switch in series with a voltage source, usually 0.7 VDC. The model can be enhanced to include a junction resistance, in order to accurately predict the diode voltage drop across the diode with respect to current flow. Up to 3000 amperes and 5000 volts in a single silicon device.
Diode–transistor logic (DTL) is a class of digital circuits that is the direct ancestor of transistor–transistor logic. It is called so because the logic gating functions AND and OR are performed by diode logic , while logical inversion (NOT) and amplification (providing signal restoration) is performed by a transistor (in contrast with ...