Search results
Results From The WOW.Com Content Network
Lime render is the first coat of lime "plaster or the like" [1] applied to the external surfaces of traditionally-built stone or brick buildings. It allows the building to 'breathe' – as lime is porous, it allows for the collection and evaporation of moisture .
Roughcast or pebbledash is a coarse plaster surface used on outside walls that consists of lime and sometimes cement mixed with sand, small gravel and often pebbles or shells. [1] The materials are mixed into a slurry and are then thrown at the working surface with a trowel or scoop.
Rendering is a traditional craft that has evolved over many centuries. Basic rendering began as a method of excluding draughts and rain by using clay to fill in cracks and crevices, referred to as wattle-and-daub. [1] Other renders, based on lime [2] binders were also used over the years. These materials had one significant disadvantage in that ...
A stone wall in France with lime mortar grouting being applied. Right: unapplied. Centre: lime mortar applied with a trowel. Left: lime mortar applied and then beaten back and brushed with a churn brush. Lime mortar or torching [1] [2] is a masonry mortar composed of lime and an aggregate such as sand, mixed with water.
For internal walls, two coats is the standard and follows the same method as for external rendering but with a weaker mix of five or six sand to one cement and one lime. However, instead of being finished with a sponge, the second coat is left rough and sometimes will be scored by nails inserted in the float.
Cement render or cement plaster is the application of a mortar mix of sand and cement, (optionally lime) and water to brick, concrete, stone, or mud brick. It is often textured, colored, or painted after application. It is generally used on exterior walls but can be used to feature an interior wall. [1]
After a wall is complete and has been pointed and allowed to cure then a base of lime render is applied to the bare stone. While this render is still wet a specially shaped trowel is used to throw the pebbles onto the lime surface, which are then lightly pressed into it. Harl, being mostly lime render, cures chemically rather than simply drying.
In Economy Village, the rear and middle wythes of brick dwelling walls are laid in a clay and sand mortar with the front wythe bedded in a lime and sand mortar to provide a weather proof seal to protect from water penetration. This allowed a rendering of clay plaster and setting coat of thin lime and fine sand on exterior-walled rooms.