Search results
Results From The WOW.Com Content Network
Energy conversion efficiency (η) is the ratio between the useful output of an energy conversion machine and the input, in energy terms. The input, as well as the useful output may be chemical, electric power, mechanical work, light (radiation), or heat. The resulting value, η (eta), ranges between 0 and 1. [1] [2] [3]
The calorie is defined as the amount of thermal energy necessary to raise the temperature of one gram of water by 1 Celsius degree, from a temperature of 14.5 °C, at a pressure of 1 atm. For thermochemistry a calorie of 4.184 J is used, but other calories have also been defined, such as the International Steam Table calorie of 4.1868 J.
The conversion is based on a Traveling-Wave Direct Energy Converter (TWDEC). A gyrotron converter first guides fusion product ions as a beam into a 10-meter long microwave cavity filled with a 10-tesla magnetic field, where 155 MHz microwaves are generated and converted to a high voltage DC output through rectennas .
In electrical engineering, power conversion is the process of converting electric energy from one form to another. A power converter is an electrical device for converting electrical energy between alternating current (AC) and direct current (DC). It can also change the voltage or frequency of the current.
1.5 US gallons (5.7 litres) of ethanol has the same energy content as 1.0 US gal (3.8 L) of gasoline. The energy content of ethanol is 76,100 BTU/US gal (5.89 kilowatt-hours per litre), compared to 114,100 BTU/US gal (8.83 kWh/L) for gasoline. (see chart above)
Electric kettle: more than 90% [citation needed] (comparatively little heat energy is lost during the 2 to 3 minutes a kettle takes to boil water). A premium efficiency electric motor: more than 90% (see Main Article: Premium efficiency). A large power transformer used in the electrical grid may have efficiency of more than 99%. Early 19th ...
From a thermodynamic viewpoint, [1] it is the use of electron vapor as the working fluid in a power-producing cycle. A thermionic converter consists of a hot emitter electrode from which electrons are vaporized by thermionic emission and a colder collector electrode into which they are condensed after conduction through the inter-electrode plasma .
Articles in this category are about converting electric energy from one impedance, phase or frequency (including direct current) to another.But the energy form remain in the same domain and the focus is on energy conversion – not signal conversion or measurement (like Current-to-voltage converter or Voltage-to-current converter).