Ad
related to: 8mm mannlicher bullet sizes
Search results
Results From The WOW.Com Content Network
Standard .323" 8mm S-bullets are correct for this caliber though best results are obtained from open-base bullets that can expand to fit the .329" bore. RCBS offers both reforming and reloading dies. When reloading for "wedge-lock" Mannlicher rifles such as the M.88, M.86/88, M.86/90 or M.88/90 chamber pressures should be kept low for safety.
This is a list of firearm cartridges which have bullets in the 8-to-9 ... 8×57mm IS/8mm Mauser: 8.20 (.323) 57.00 (2.244) ... 8×56mmR Mannlicher: 8.35 (.329) 55.63 ...
Reloading the 8×56mmR Mannlicher can be problematic, due to the .329" groove diameter of the barrel. Commonly available .323" 8mm "S"-bullets will produce very poor accuracy. Open-base jacketed bullets, such as the .323" 244 grain round-nose FMJ bullets used in the 8×50mmR Mannlicher, will often produce better results but are difficult to obtain.
Size: Metric size - may not be official ... aka 6.5×54mm Mannlicher–Schönauer "Greek", based on 6.5×53mmR ... Civilian 8mm Mauser. Comes in J and S bullets ...
This gave the bullet an approximate velocity of 1,750 ft/s (530 m/s) out of the M.88's 30" barrel. Many M.86 rifles were converted to accommodate this new cartridge, creating the M.86/88 and M.86/90. [1] It was succeeded by the semi-smokeless and later on the fully-smokeless powder 8×50mmR Mannlicher cartridge.
The bullet was basically the same as used in the S.m.K. ammunition but combined with a tracer that burned for 800 to 1,000 m (875 to 1,094 yd). It had a bullet weight of 10.00 g (154.3 gr) and a muzzle velocity of 810 m/s (2,657 ft/s) and an operating pressure of 280 MPa (40,611 psi).
8×50mmR Mannlicher: 8×50mmR Mannlicher reloadable cartridge cases can be produced by reforming and trimming 8×56mmR Mannlicher or 7.62×54mmR Mosin–Nagant Russian brass. Standard .323" 8mm S-bullets are correct for this caliber though best results are obtained from open-base bullets that can expand to fit the .329" bore.
The widespread availability of standard size Mauser 98 rifles and the fact that the .375 H&H Magnum cartridge and its necked down version the .300 H&H Magnum with approximately 72 mm (2.83 in) case length were too long to fit in standard sized Mauser 98 bolt-action rifles makes the shorter 8×68mm S, 6.5×68mm and .375 Hölderlin interesting ...