When.com Web Search

  1. Ads

    related to: plywood sizes in inches

Search results

  1. Results From The WOW.Com Content Network
  2. Plywood - Wikipedia

    en.wikipedia.org/wiki/Plywood

    The most commonly used thickness range is from 1 ⁄ 8 to 3 inches (3.2–76.2 mm). The sizes of the most commonly used plywood sheets are 4 by 8 feet (1,220 mm × 2,440 mm) [20] which was first used by the Portland Manufacturing Company, who developed modern veneer core plywood for the 1905 Portland World Fair. A common metric size for a sheet ...

  3. BS 1088 - Wikipedia

    en.wikipedia.org/wiki/BS_1088

    Moisture Content-- BS 1088 plywood must have a moisture content between 6% and 14% when it leaves the factory. Finishing-- Boards will be sanded on both sides equally. Length & Width-- The length or width of a board produced as a standard size shall not be less than the specified size nor more than 6.3 mm (0.25") greater than the specified size.

  4. Pallet - Wikipedia

    en.wikipedia.org/wiki/Pallet

    Heavy duty International Plant Protection Convention (IPPC) Pallets are approximately 44 inches (1,118 mm) wide by 48 inches (1,219 mm) long, have three wood stringers that are a nominal 4 inches (102 mm) high by 3 inches (76 mm) wide timber, and weigh about 135 pounds (61 kg). Their deck is fully covered by 30 mm (1.18 in) plywood, and is ...

  5. Medium density overlay panel - Wikipedia

    en.wikipedia.org/wiki/Medium_density_overlay_panel

    It is a plywood product, with a paper face overlaid on the plywood substrate with an exterior grade (usually) phenolic adhesive. MDO is designed to have a smooth, paint-receptive surface. One or both faces can be surfaced with paper, and is produced in 4-foot-by-8-foot sheets from 3 ⁄ 8 inches to over 3 inches in thickness.

  6. Lumber - Wikipedia

    en.wikipedia.org/wiki/Lumber

    As previously noted, less wood is needed to produce a given finished size than when standards called for the green lumber to be the full nominal dimension. However, even the dimensions for finished lumber of a given nominal size have changed over time. In 1910, a typical finished 1-inch (25 mm) board was 13 ⁄ 16 in (21 mm). In 1928, that was ...

  7. Board foot - Wikipedia

    en.wikipedia.org/wiki/Board_foot

    The board foot or board-foot is a unit of measurement for the volume of lumber in the United States and Canada [1].It equals the volume of a board that is one foot (30.5 cm) in length, one foot in width, and one inch (2.54 cm) in thickness, or exactly 2.359 737 216 liters.