Ads
related to: method tires 32 by 10 mm x 6 mwalmart.com has been visited by 1M+ users in the past month
extremeterrain.com has been visited by 10K+ users in the past month
Search results
Results From The WOW.Com Content Network
In a 2003 report cited by the U.S. EPA, it is stated that markets ("both recycling and beneficial use") existed for 80.4% of scrap tires, about 233 million tires per year. Assuming 22.5 pounds (10.2 kg) per tire, the 2003 report predicts a total weight of about 2.62 million tonnes (2,580,000 long tons; 2,890,000 short tons) from tires. [20]
Off-roading tires may use a different measurement scheme: Tread width × Outside diameter, followed by wheel size (all in inches) – for example 31×10.50R15 (787 mm × 267 mm R380 in metric designation). The size of the wheel, however, is denoted as 8.5 in × 20.0 in (220 mm × 510 mm).
During this time the tires are effectively dragging on the runway as well as being put under pressure by the weight of the airplane. This can be seen in the slight puff of smoke that comes from a landing aircraft's tires as they first touch the runway surface. The friction built up causes the rubber to polymerize and harden to the runway surface.
Less commonly used in the US and Europe (but often in Japan for example) is a notation that indicates the full tire diameter instead of the aspect ratio of the side-wall height. To take the same example, a 16-inch rim would have a diameter of 406 mm. Adding twice the tire height (2×107 mm) makes a total 620 mm tire diameter.
Waste tires are generally discarded after only a small amount of rubber is worn away. Even so, these tires are unfit for further use in the vehicles they were made for. At the same time they are also unwelcome in landfills and have been proven to be an environmental threat. Tires take a great deal of valuable space in landfills.
The inner width of the rim on which the tire is mounted should be about 65% of the tire's nominal section width for tires smaller than 30 mm and 55% for those larger. The section height of a tire is usually identical to its section width (for tires less than 28 mm, 2.5 mm have to be added to the width to get the height).