Ads
related to: high-speed hdmi 1.4 port hdmi 1 4 port look like for chemo
Search results
Results From The WOW.Com Content Network
Premium High Speed HDMI Cable with Ethernet; In conjunction with the HDMI 2.1 specification, a third category of cable was announced on January 4, 2017, called "48G". [81] Also known as Category 3 HDMI or "Ultra High Speed" HDMI, the cable is designed to support the 48 Gbit/s bandwidth of HDMI 2.1, supporting 4K, 5K, 8K and 10K at 120 Hz. [82]
The EIA/CEA-861-E standard has the first 64 short video descriptors above. It is used by HDMI 1.4–1.4b. The CTA-861-F standard has the first 107 short video descriptors above. It is used by HDMI 2.0–2.0b. The CTA-861-G standard has the full list of 154 (1–127, 193–219) short video descriptors above. It is used by HDMI 2.1.
1 Mini-DIN 4-pin, 1 Mini-DIN 7-pin, 1 Mini-VGA, 2 BNC, 2 RCA connectors, 8-pin DIN, [4] SCART 21-pin: S-VHS, some laptop computers, analog broadcast video, 1980-1990s home computers including the Commodore 64, C128 and Atari 8-bit computers: The 4-pin mini-DIN that is most common in consumer products today debuted in JVC's 1987 S-VHS. The 7-pin ...
It allows up to 4 lanes of PCI Express 3.0 (32.4 Gbit/s) for general-purpose data transfer, and 4 lanes of DisplayPort 1.4 HBR3 (32.40 Gbit/s before 8/10 encoding removal, and 25.92 Gbit/s after) for video, [79] but the maximum combined data rate cannot exceed 40 Gbit/s; video data will be using all needed speed, limiting PCIe data. DP 1.2 ...
SlimPort is a proprietary alternative to MHL, based on the DisplayPort standard integrated into common Micro-USB ports, and supports up to 1080p60 or 1080p30 with 3D content over HDMI 1.4 (up to 5.4 Gbit/s of bandwidth), in addition to support for DVI, VGA (up to 1920 × 1080 at 60 Hz), and DisplayPort. [28]
The receiver samples the line at 1.05 ± 0.2 ms after the falling edge, then begins watching for the following bit 1.9 ± 0.15 ms after the falling edge. A receiver can convert a transmitted 1 bit to a 0 bit by pulling the line low within 0.35 ms of the falling edge, and holding it until the 0 bit time.