Ads
related to: critical range of rpm for aluminum heads chevy
Search results
Results From The WOW.Com Content Network
The Chevrolet 90° V6 family of V6 engines began in 1978 with the Chevrolet 200 cu in (3.3 L) as the base engine for the all new 1978 Chevrolet Malibu.The original engine family was phased out in early 2014, with its final use as the 4.3 L (262 cu in) V6 engine used in Chevrolet and GMC trucks and vans.
The solid lifter version was capable of being operated in the upper 6000 rpm range, and when installed in the 1965 Corvette, was factory-rated at 425 hp (317 kW). Introduced in 1970, the 402 cu in (6.6 L) was a 396 cu in (6.5 L) bored out by 0.03 in (0.76 mm).
The 1973–1974 L82 was a "performance" version of the 350 that still used the casting number 624 76cc chamber "2.02" heads but with a Rochester Quadra-jet 4bbl carburetor and dual-plane aluminum intake manifold, the earlier L46 350 hp (261 kW) 350 hydraulic-lifter cam, and 9.0:1 compression forged-aluminum pistons producing 250 hp (186 kW ...
The High Value engine family from General Motors is a group of cam-in-block or overhead valve V6 engines.These engines feature cast iron blocks and aluminum heads, and use the same 60° vee bank as the 60° V6 family they are based on, but the new 99 mm (3.90 in) bore required offsetting the bores by 1.5 mm (0.059 in) away from the engine center line.
These engines vary in displacement between 2.8 and 3.4 litres (2,837 and 3,350 cc) and have a cast-iron block and either cast-iron or aluminum heads. Production of these engines began in 1980 and ended in 2005 in the U.S., with production continued in China until 2010.
The engine is rated at 420 hp (313 kW; 426 PS) of power at 5750 rpm and 430 lb⋅ft (583 N⋅m) of torque at 3500–4500 rpm (with 90% of torque being available at 2500–5500 rpm) and helps the CTS achieve 0–60 mph (0–97 km/h) time of 4.6 seconds with an 8-speed automatic transmission.
The following year the motor became available in the compact Chevy II also. For the 1970 model year the 396 was bored 0.03 in (0.76 mm), resulting in a 402 cu in (6.6 L) engine. Despite this, the motor was still badged as a 396. 1970 was also the final production year for the L78.
Max RPM: 10,300 rpm - 10,700 rpm [10] Weight: 281 lb (127 kg) Oil system: Dry-sump lubrication; Aspiration: Naturally-aspirated; Camshafts: Gear-driven Double-overhead camshafts; Cylinder head: 4 valves per cylinder; Fuel injection/system: Sequential EFI with two injectors/cylinder; Fuel: Methanol; Block & head material: Aluminum