Ads
related to: rope splice
Search results
Results From The WOW.Com Content Network
Splices can be used to form a stopper at the end of a line, to form a loop or an eye in a rope, or for joining two ropes together. [1] Splices are preferred to knotted rope, since while a knot typically reduces the strength by 20–40%, [2] a splice is capable of attaining a rope's full strength. [3]
Marlinspike derives from the practice of "marling", winding small diameter twine called marline around larger ropes to form protective whippings. [1] The long-billed fish marlin is thought to be named after the marlinspike. [2] Marlin spike gets its name from the small cord called marlin, which is typically tarred and used for the serving of rope.
Ropework or marlinespike seamanship are umbrella terms for a skillset spanning the use, maintenance, and repair of rope. Ropework is used by seafarers, climbers and military personnel. [1] Included are tying knots, splicing, making lashings, whippings, and proper use and storage of rope.
Eye splices from Carl Smith's 1899 Båtseglareordbok [1] Eye splice from Alpheus Hyatt Verrill's 1917 Knots, Splices and Rope Work [2] The eye splice is a method of creating a permanent loop (an "eye") in the end of a rope by means of rope splicing. The Flemish eye is a type of circular loop at the end of a thread.
These long ropes were necessary in shipping as short ropes would require splicing to make them long enough to use for sheets and halyards. The strongest form of splicing is the short splice, which doubles the cross-sectional area of the rope at the area of the splice, which would cause problems in running the line through pulleys.
In addition to holding rope open to assist the creation of a rope splice, modern push fids have markings for precise measurements in a variety of sizes of rope. The length of these fids is typically 21 or 22 times the diameter of rope to be spliced. A one-half-inch (12.7 mm) diameter rope would have any accompanying fid 10.5–11 in (266.7 ...