Search results
Results From The WOW.Com Content Network
The 10.5" 14-bolt differential and axle is quite popular with Jeep Wrangler owners who want to upgrade their standard Dana 30, Dana 35, or Dana 44 axle. While the 10.5" 14-bolt axle is heavier than the standard Dana axles offered on the Wrangler, it is much stronger.
The 1 + 1 ⁄ 4 ton M880-series was based on the Dodge W200, a 3 ⁄ 4 ton capacity 4×4 civilian/commercial truck. The 880/890 had a 2,500 lb cargo rating, enabling it to have a 5 ⁄ 4-ton load rating. The similar 1 + 1 ⁄ 4 ton M890-series was based on the Dodge D200, a 3 ⁄ 4 ton capacity 4×2 civilian/commercial truck.
AMC 20s have an 8 7/8" ring gear and use a 29 spline axle shaft. The AMC 20 was most often used with V8 engines in cars and Jeeps . It was also used in the AM General Humvee .
From 1980 to 1984, the rear axle was typically a Ford 9-inch axle, with the Ford 8.8 axle being phased in gradually; the 9-inch ended production (alongside this generation) in 1986. The F-250 used an 8 lug version of the Dana 44 TTB called the Dana 44 TTBHD with the Dana 50 TTB being an option.
The Ford 8.8 is an automotive axle manufactured by Ford Motor Company at the Sterling Axle Plant in Sterling Heights, MI. It was first used in model year 1983 Ford trucks. The axle was developed to replace the Ford 9-inch axle. This axle is still in production today for a variety of Ford vehicles.
The Dana 44 has a GAWR up to 3,500 lb (1,600 kg) and is a semi-floating type, having one bearing on the end of the axle shaft which carries the weight of the vehicle on the axle and also allows axle rotation. There is an 8.9" diameter Dana 44 ring and pinion that is very different from the standard Dana 44.
It measures 117.5 from the bumper to the back of the cab. Designed for local use it usually has a day-cab but a 36" integral sleeper is available. Commonly a 6x4 (3 axles, 2 powered) there are packages from 4x2 (2 axles, 1 powered) to 8x6 (4 axles, 3 powered) and can be fitted with driven front, tandem-steer, lift, and extended trailing axles.
A ladder frame with beam axles is used. There is a single front axle on semi-elliptical leaf springs. The base rear suspension is a Mack tandem with two powered axles, a single rear drive axle with an undriven pusher axle is available. Wheelbases are from 174 to 203 inches (440 to 520 cm) A set-back front axle is used.