Search results
Results From The WOW.Com Content Network
In making crucible steel, the blister steel bars were broken into pieces and melted in small crucibles, each containing 20 kg or so. This produced higher quality metal, but increased the cost. The Bessemer process reduced the time needed to make lower-grade steel to about half an hour while requiring only enough coke needed to melt the pig iron.
This was produced using the crucible steel method, based on the earlier Indian wootz steel. This process was adopted in the Middle East using locally produced steels. The exact process remains unknown, but it allowed carbides to precipitate out as micro particles arranged in sheets or bands within the body of a blade. Carbides are far harder ...
The material evidence consists of large number of archaeological finds relating to steel making from 9th–12th centuries CE in the form of hundreds of thousands of fragments of crucibles, often with massive slag cakes. [39] Archaeological work at Akhsiket, has identified that the crucible steel process was of the carburization of iron metal. [12]
The process also decreased the labor requirements for steel-making. Before it was introduced, steel was far too expensive to make bridges or the framework for buildings and thus wrought iron had been used throughout the Industrial Revolution. After the introduction of the Bessemer process, steel and wrought iron became similarly priced, and ...
Steel is an alloy composed of between 0.2 and 2.0 percent carbon, with the balance being iron. From prehistory through the creation of the blast furnace, iron was produced from iron ore as wrought iron, 99.82–100 percent Fe, and the process of making steel involved adding carbon to iron, usually in a serendipitous manner, in the forge, or via the cementation process.
The origin of the name "Damascus Steel" is contentious. Islamic scholars al-Kindi (full name Abu Ya'qub ibn Ishaq al-Kindi, circa 800 CE – 873 CE) and al-Biruni (full name Abu al-Rayhan Muhammad ibn Ahmad al-Biruni, circa 973 CE – 1048 CE) both wrote about swords and steel made for swords, based on their surface appearance, geographical location of production or forging, or the name of the ...
Like Samian ware, moulds were created by making a model of the desired shape (whether through wood, wax, or metal), which would then be pressed into a clay mould. In the case of a metal or wax model, once dry, the ceramic could be heated and the wax or metal melted until it could be poured from the mould (this process utilising wax is called ...
Tatara (鑪) is a traditional Japanese method of processing iron into steel, which was typically use for making Japanese swords. [2] The process and name first appear in the ancient Kojiki and Nihon Shoki texts from the Nara period. The process is believed to have originated in the Kingdom of Kibi around the middle of the sixth century, spread ...