Search results
Results From The WOW.Com Content Network
A power loom is a mechanized loom, and was one of the key developments in the industrialization of weaving during the early Industrial Revolution. The first power loom was designed and patented in 1785 by Edmund Cartwright. [1] It was refined over the next 47 years until a design by the Howard and Bullough company made the operation completely ...
A Draper loom in textile museum, Lowell, Massachusetts A Draper loom showing a Northrop filling-changing battery (the cylinder of pirns) in Bamberg, South Carolina The Northrop Loom was a fully automatic power loom marketed by George Draper and Sons, Hopedale, Massachusetts beginning in 1895.
This process is called taking up. At the same time, the warp yarns must be let off or released from the warp beam, unwinding from it. To become fully automatic, a loom needs a tertiary motion, the filling stop motion. This will brake the loom if the weft thread breaks. [4] An automatic loom requires 0.125 hp to 0.5 hp to operate (100W to 400W).
The power looms also created a lot of vibrations, which forced them to be located on the lower level of the mills, or eventually in separate weave sheds, apart from the main mill buildings. In 1895, the Northrop Automatic Loom was patented in England, Belgium, Germany, Russia, Austria, and Spain. By 1900, Draper had sold over 60,000 Northrop Looms.
[5] At this point the loom has become fully automatic, this is the Kenworthy and Bullough Lancashire Loom. The Cartwight loom weaver could work one loom at 120–130 picks per minute- with a Kenworthy and Bullough's Lancashire Loom, a weaver can run up to six looms working at 220–260 picks per minute- thus giving 12 times more throughput.
It is the "Jacquard head" that adapts to a great many dobby looms that allow the weaving machine to then create the intricate patterns often seen in Jacquard weaving. Jacquard-driven looms, although relatively common in the textile industry, are not as ubiquitous as dobby looms which are usually faster and much cheaper to operate.
The company was founded on 18 November 1926 as Toyoda Automatic Loom Works, Ltd. by Sakichi Toyoda, the inventor of a series of manual and machine-powered looms.The most significant of these was the 1924 Toyoda Automatic Loom, Type G, a completely automatic high-speed loom featuring the ability to change shuttles without stopping and dozens of other innovations.
The Roberts was made at a time when the power loom industry was set to expand. Until this moment, hand looms were more common than power looms. The reliable Roberts loom was quickly adopted and again it was the spinning side that was short of capacity. Roberts then addressed this, with the construction of a self-acting (automatic) spinning mule.