Ads
related to: concrete pile sleeves for construction
Search results
Results From The WOW.Com Content Network
Notice the sleeves, fastened to the timber forms before the concrete is cast. improper sleeving in a drywall assembly. In construction , a sleeve is used both by the electrical and mechanical trades to create a penetration in a solid wall, ceilling or floor.
Once initial piles are set with concrete, other shafts are augured between them, slicing into the original piles, with the new ones receiving rebar. The finished result is a continuous wall of reinforced concrete that aids and protects workers during excavation.
A pile cap is a thick concrete mat that rests on concrete or timber piles that have been driven into soft or unstable ground to provide a suitable stable foundation. It usually forms part of the deep foundation of a building, typically a multi-story building, structure or support base for heavy equipment, or of a bridge.
Secant pile walls are constructed such that space is left between alternate 'female' piles for the subsequent construction of 'male' piles. [clarification needed] Construction of 'male' piles involves boring through the concrete in the 'female' piles hole in order to key 'male' piles between. The male pile is the one where steel reinforcement ...
The reinforcement materials of MSE can vary. Originally, long steel strips 50 to 120 mm (2 to 5 in) wide were used as reinforcement. These strips are sometimes ripped, although not always, to provide added friction. There are also prefabricated pile sleeve options to reduce negative skin friction on piles embedded behind MSE bridge abutments. [7]
Small charges of concrete can be added while the base is being formed [6] to enlarge the base and improve the pile’s settlement performance. [3] Franki piles can be installed raked (or sloped) with a tilt of up to 4:1. [5] Raked Franki piles are always reinforced and are particularly suitable for structures subject to dynamic forces. [1]
Concrete spun pile driving using diesel hammer in Patimban Deep Sea Port, Indonesia. A modern diesel pile hammer is a large two-stroke diesel engine. The weight is the piston, and the apparatus which connects to the top of the pile is the cylinder. Piledriving is started by raising the weight; usually a cable from the crane holding the pile ...
The connection to the pile is usually achieved using a grouted connection. This is a technique where special concrete is poured in the joint gap between pile and pile sleeve. Due to the resulting composite effect the loads are transferred from the sleeve to the pile, and thus into the ground.