Ad
related to: displayport 1.2 mode definition computer programming
Search results
Results From The WOW.Com Content Network
DisplayPort connector A DisplayPort port (top right) on a laptop from 2010, near an Ethernet port (center) and a USB port (bottom right). DisplayPort (DP) is a proprietary [a] digital display interface developed by a consortium of PC and chip manufacturers and standardized by the Video Electronics Standards Association (VESA).
Display Data Channel (DDC) is a collection of protocols for digital communication between a computer display and a graphics adapter that enable the display to communicate its supported display modes to the adapter and that enable the computer host to adjust monitor parameters, such as brightness and contrast.
Ultra High-Definition, or Quad Full High-Definition Four times the resolution of 1080p. Requires a dual-link DVI, category 2 (high-speed) HDMI, DisplayPort or a single Thunderbolt link, and a reduced scan rate (up to 30 Hz); a DisplayPort 1.2 connection can support this resolution at 60 Hz, or 30 Hz in stereoscopic 3D. 3840×2160 (8,294k) 3840 2160
The USB-C plug USB cable with a USB-C plug and a USB-C port on a notebook computer. The USB-C connector supersedes all earlier USB connectors and the Mini DisplayPort connector. It is used for all USB protocols and for Thunderbolt (3 and later), DisplayPort (1.2 and later), and others.
The monitor only supported DisplayPort version 1.2, which is limited to 5120 × 2880 at 30 Hz. To work around this, the UP2715K implemented a system by which the bandwidth of two DisplayPort connections could be combined to achieve 60 Hz, using a picture-by-picture mode to virtually treat the display as two smaller 2560 × 2880 monitors side-by ...
The first version of the MIPI DSI, version 1.0 was released in 2005. MIPI DSI v1.1 was released in 2007, and added features such as "Command Mode" for directly sending commands and data to display modules using the display controller. [1] DSI v1.2 was released in 2011, and extended the video packet length and expanded the command mode. [2]
Thunderbolt (interface) also supports daisy-chained devices such as RAID arrays and computer monitors. [3] DisplayPort 1.2 and higher features Multi-Stream Transport (MST) mode. In this mode, multiple screens can be connected either using a hub or as a daisy chain. The Hexbus is the 10-wire bus of Texas Instruments, used in the TI-99/4A, CC-40 ...
They are also capable of providing DisplayPort Alternate Mode as well as DisplayPort over USB4 Fabric, making the function of a Thunderbolt 3 port a superset of that of a USB 3.1 Gen 2 port. DisplayPort Alternate Mode 2.0: USB4 (requiring USB-C) requires that hubs support DisplayPort 2.0 over a USB-C Alternate Mode.