Ads
related to: sprue molding trim
Search results
Results From The WOW.Com Content Network
A sprue is a large diameter vertical channel through which liquid material is introduced into a mold. It connects the pouring basin to the runner. In many cases it controls the flow of material into the mold. During casting or molding, the material in the sprue will solidify and need to be removed from the finished part. It is usually tapered ...
Sprue puller pin—The sprue puller pin pulls the sprue from the sprue bush. It is usually made of CHMCS; Core back plate—It holds the core insert in place and acts as a "stiffener". It is usually made of mild steel. Guide pillar and guide bushing — The guide pillar and guide bush align the fixed and moving halves of a mold in each cycle.
The pattern is lifted from the sand, leaving a molding cavity. A passageway for metal to enter the mold, called a "gate", is then cut from the sprue hole to the void left by the pattern, and a runner is cut from the sand to allow metal to flow into the riser. The flask is then put back together, and metal can be poured into the mold.
Injection moulding (U.S. spelling: injection molding) is a manufacturing process for producing parts by injecting molten material into a mould, or mold. Injection moulding can be performed with a host of materials mainly including metals (for which the process is called die-casting ), glasses , elastomers , confections , and most commonly ...
Mold cavity: The combined open area of the molding material and core, where the metal is poured to produce the casting. Riser: An extra void in the mold that fills with molten material to compensate for shrinkage during solidification. Gating system: The network of connected channels that deliver the molten material to the mold cavities.
A bronze casting showing the sprue and risers. A riser, also known as a feeder, [1] is a reservoir built into a metal casting mold to prevent cavities due to shrinkage.Most metals are less dense as a liquid than as a solid so castings shrink upon cooling, which can leave a void at the last point to solidify.