Ad
related to: flat top beam profile example for construction
Search results
Results From The WOW.Com Content Network
A laser beam profiler captures, displays, and records the spatial intensity profile of a laser beam at a particular plane transverse to the beam propagation path. Since there are many types of lasers— ultraviolet , visible , infrared , continuous wave , pulsed, high-power, low-power—there is an assortment of instrumentation for measuring ...
Tophat beams are often used in industry, for example for laser drilling of holes in printed circuit boards. They are also used in very high power laser systems, which use chains of optical amplifiers to produce an intense beam. Tophat beams are named for their resemblance to the shape of a top hat.
Pre-cast concrete beams may be delivered on site to be installed for the second floor, after which a concrete slab may be poured for the pavement area. This can be done for multiple stories. [17] A parking garage of this type is just one possible example of many structures that may use both reinforced concrete and structural steel.
The structural channel is not used as much in construction as symmetrical beams, in part because its bending axis is not centered on the width of the flanges. If a load is applied equally across its top, the beam will tend to twist away from the web. This may not be a weak point or problem for a particular design, but is a factor to be ...
In Canada, steel I-beams are now commonly specified using the depth and weight of the beam in metric terms. For example, a "W250x33" beam is approximately 250 millimetres (9.8 in) in depth (height of the I-beam from the outer face of one flange to the outer face of the other flange) and weighs approximately 33 kg/m (22 lb/ft; 67 lb/yd). [8]
In fabricating, a profile consists of the more-or-less complex outline of a shape to be cut in a sheet of material such as laminated plastic, aluminium alloy or steel plate. In modern practice, a drawing office determines the shape and dimensions required to fit the sheet into a larger work and feeds directions to a computer controlling a ...
Historically a beam is a squared timber, but may also be made of metal, stone, or a combination of wood and metal [1] such as a flitch beam.Beams primarily carry vertical gravitational forces, but they are also used to carry horizontal loads such as those due to earthquake or wind, or in tension to resist rafter thrust or compression (collar beam).
Cross-sections of continuously rolled structural shapes, showing the change induced by each rolling mill. Structural shape rolling, also known as shape rolling and profile rolling, [1] is the rolling and roll forming of structural shapes by passing them through a rolling mill to bend or deform the workpiece to a desired shape while maintaining a constant cross-section.