Search results
Results From The WOW.Com Content Network
[nb 3] The Queen Anne wine gallon of 231 cubic inches was adopted in 1707, and still serves as the definition of the US gallon. A US tun is thus the volume of a rectangular cuboid with dimensions 36 by 38.5 by 42 inches. When the imperial system was introduced the tun was redefined in the UK and colonies as 210 imperial gallons.
A Marsh funnel is a Marsh cone with a particular orifice and a working volume of 1.5 litres. It consists of a cone 6 inches (152 mm) across and 12 inches in height (305 mm) to the apex of which is fixed a tube 2 inches (50.8 mm) long and 3/16 inch (4.76 mm) internal diameter. A 10-mesh screen is fixed near the top across half the cone. [2]
The tun (Old English: tunne, Latin: tunellus, Medieval Latin: tunna) is an English unit of liquid volume (not weight), used for measuring wine, [1] oil or honey. Typically a large vat or vessel, most often holding 252 wine gallons, but occasionally other sizes (e.g. 256, 240 and 208 gallons) were also used. [2] The modern tun is about 954 litres.
Ships in that size range can carry between 2.5 million and 3.5 million gallons of fuel. The amount of fuel actually be used on a sailing depends primarily on the ship's speed.
The Builder's Old Measurement formula remained in effect until the advent of steam propulsion. Steamships required a different method of estimating tonnage, because the ratio of length to beam was larger and a significant volume of internal space was used for boilers and machinery. In 1849, the Moorsom System was created in the United Kingdom ...
A conical measure is a type of laboratory glassware which consists of a conical cup with a notch on the top to allow for the easy pouring of liquids, and graduated markings on the side to allow easy and accurate measurement of volumes of liquid. They may be made of plastic, glass, or borosilicate glass. The use of the conical measure usually ...
The area required to calculate the volumetric flow rate is real or imaginary, flat or curved, either as a cross-sectional area or a surface. The vector area is a combination of the magnitude of the area through which the volume passes through, A , and a unit vector normal to the area, n ^ {\displaystyle {\hat {\mathbf {n} }}} .
A typical batch reactor consists of a pressure vessel with an agitator and integral heating/cooling system. The vessels may vary in size from less than 1 L to more than 15,000 L. They are usually fabricated in steel, stainless steel, glass-lined steel, glass or exotic alloys. Liquids and solids are usually charged via connections in the top ...