Search results
Results From The WOW.Com Content Network
Bonnet roof: A reversed gambrel or Mansard roof with the lower portion at a lower pitch than the upper portion. Monitor roof: A roof with a monitor; 'a raised structure running part or all of the way along the ridge of a double-pitched roof, with its own roof running parallel with the main roof.'
Compass rafter: A rafter curved or bowed on the top (the top surface of a rafter is called its "back") or both the top and bottom surfaces. Curb rafter: The upper rafters in a curb (kerb, gambrel, Mansard roof) roof. Hip rafter (angle rafter): The rafter in the corners of a hip roof. The foot of a hip rafter lands on a dragon beam.
Two king post trusses linked to support a roof. Key:1: ridge beam, 2: purlins, 3: common rafters. This is an example of a "double roof" with principal rafters and common rafters. A timber roof truss is a structural framework of timbers designed to bridge the space above a room and to provide support for a roof.
As the occupied part of the building has become warmer, the roof space has become colder, with high performance insulation and roofing membranes leading to a cold roof space. When the warm, moist air from below rises into the cold roof space, condensation begins as the air temperature drops to the ‘dew point’ or as the warm air comes into ...
A view of a roof using common purlin framing. The purlins are marked in red. This view is from the inside of the building, below the roof. The rafters are the beams of wood angled upward from the ground. They meet at the top of the gable at a ridge beam, which has extra bracing to attach it to the rafters.
A birds-mouth joint in a rafter, set upon a double top plate. Shown are the two cuts of the joint: the seat cut and the heel cut. In light frame construction, a birdsmouth joint or bird's beak cut is a woodworking joint that is generally used to connect a roof rafter to the top plate of a supporting wall. [1]
Hip: protruding line formed by the intersection of two roof slopes. Brisé: the lower part of a Mansard roof. Cabrons: over-rafter wooden profiles that create waves under flexible covering. Chanlatte: beveled wooden lath, nailed on the rafters at the edge of the roof to compensate for the missing tile thickness in the first row (tilting).
The simplest form of roof framing is a common rafter roof. This roof framing has nothing but rafters and a tie beam at the bottoms of the rafters. The next step in the development of roof framing was to add a collar, called a collar beam roof. Collar beam roofs are suitable for spans up to around (4.5 meters). [5]