Ads
related to: substandard motherboard vs atx server
Search results
Results From The WOW.Com Content Network
Typically used for server-class type motherboards with dual processors and too much circuitry for a standard E.ATX motherboard. LPX: Western Digital? 229 × 279–330 mm (9 × 11–13 in) Based on a design by Western Digital, it allowed smaller cases than the AT standard, by putting the expansion card slots on a Riser card. Used in slimline ...
The rear panel aperture is identical to the EEB and ATX specification and expansion cards mounted on an SSI CEB motherboard appear much the same as they would on an ATX motherboard. To standardize thermal behavior, processor position is defined, including primary and secondary processor identification.
The WTX specification was created to standardize a new motherboard and chassis form factor, fix the relative processor location, and allow for high volume airflow through a portion of the chassis where the processors are positioned. This allowed for standard form factor motherboards and chassis to be used to integrate processors with more ...
The ATX motherboard connector was extended to 24 pins. The extra four pins provide one additional 3.3 V, 5 V and 12 V circuit. The six-pin AUX connector from ATX12V 1.x was removed because the extra 3.3 V and 5 V circuits which it provided are now incorporated in the 24-pin ATX motherboard connector.
Comparison of the form factors for motherboards ATX, μATX (micro-ATX), DTX, mini-ITX and mini-DTX The DTX form factor is a variation of ATX specification [1] designed especially for small form factor PCs (especially for HTPCs) with dimensions of 8 × 9.6 inches (203 × 244 mm). [2]
FlexATX specifies that a motherboard be no larger than 9 × 7.5 in (229 × 191 mm), and can have no more than three expansion slots. The term is used also for the form factor of a PSU that is smaller than a standard ATX PSU and is used in small cases that host a FlexATX or Mini-ITX motherboard or in thin rackmount servers such as 1U racks