Search results
Results From The WOW.Com Content Network
British Columbia uses a minimum setback of 4.5 metres (15 feet) of any building, mobile home, retaining wall, or other structure from all highway rights-of-way under the jurisdiction of the Ministry of Transportation and Infrastructure unless the building has access from another street, in which case the allowed setback is 3 metres (10 feet). [3]
For the same reason, setbacks may also be used in lower density districts to limit the height of perimeter walls above which a building must have a pitched roof or be set back before rising to the permitted height. [5] In many cities, building setbacks add value to the interior real estate adjacent to the setback by creating usable exterior spaces.
Such a plan of a site is a "graphic representation of the arrangement of buildings, parking, drives, landscaping and any other structure that is part of a development project". [2] A site plan is a "set of construction drawings that a builder or contractor uses to make improvements to a property. Counties can use the site plan to verify that ...
This can be as simple as deciding what a likely maximum load case is at the contact patch, and then drawing a Free body diagram of each part to work out the forces, or as complex as simulating the behaviour of the suspension over a rough road, and calculating the loads caused. Often loads that have been measured on a similar suspension are used ...
An outbuilding, sometimes called an accessory building [1] or a dependency, is a building that is part of a residential or agricultural complex but detached from the main sleeping and eating areas.
In a structure where the surface distributing the forces to the elements is flexible (like a wood-framed structure), the elements will carry loads in proportion to their relative tributary areas. A structure is considered to fail the chosen serviceability criteria if it is insufficiently stiff to have acceptably small deflection or dynamic ...
However any two or more of the basic structural types described in the following may be combined in a single structure, such as a building or a bridge in order to meet the structure's functional requirements. [1] Tensile structures: Members of tensile structures are subject to pure tension under the action of external loads. Because the tensile ...
A free body diagram is not a scaled drawing, it is a diagram. The symbols used in a free body diagram depends upon how a body is modeled. [6] Free body diagrams consist of: A simplified version of the body (often a dot or a box) Forces shown as straight arrows pointing in the direction they act on the body