Search results
Results From The WOW.Com Content Network
Biodiesel can reduce the direct tailpipe-emission of particulates, small particles of solid combustion products, on vehicles with particulate filters by as much as 20 percent compared with low-sulfur (< 50 ppm) diesel. Particulate emissions as the result of production are reduced by around 50 percent compared with fossil-sourced diesel.
Biodiesel production is the process of producing the biofuel, biodiesel, through the chemical reactions of transesterification and esterification. [1] This process renders a product (chemistry) and by-products. The fats and oils react with short-chain alcohols (typically methanol or ethanol). The alcohols used should be of low molecular weight.
This improves the combustion of biodiesel and reduces the particulate emissions from unburnt carbon. However, using pure biodiesel may increase NO x -emissions [ 36 ] Biodiesel is also safe to handle and transport because it is non-toxic and biodegradable , and has a high flash point of about 300 °F (148 °C) compared to petroleum diesel fuel ...
Biofuels include bioethanol, an alcohol made by fermentation—often used as a gasoline additive, and biodiesel, which is usually used as a diesel additive. Specific energy is energy per unit mass, which is used to describe the chemical energy content of a fuel, expressed in SI units as joule per kilogram (J/kg) or equivalent units. [1]
Biodiesel from vegetable oil sources have been recorded as having a cetane number range of 46 to 52, and animal-fat based biodiesels cetane numbers range from 56 to 60. [12] Dimethyl ether is a potential diesel fuel as it has a high cetane rating (55-60) and can be produced as a biofuel . [ 13 ]
Bioenergy with carbon capture and storage (BECCS) is the process of extracting bioenergy from biomass and capturing and storing the carbon dioxide (CO 2) that is produced. Greenhouse gas emissions from bioenergy can be low because when vegetation is harvested for bioenergy, new vegetation can grow that will absorb CO 2 from the air through ...
The process was invented by Lewis Cass Karrick in the 1920s. The Karrick process is a low-temperature carbonization process, where coal is heated at 680 °F (360 °C) to 1,380 °F (750 °C) in the absence of air. These temperatures optimize the production of coal tars richer in lighter hydrocarbons than normal coal tar.
Biodiesel in liquid state. There are two main types of biofuels produced: Ethanol and Biodiesel. Biodiesel is a liquid fuel composed of vegetable oils and or animal fats. To create the gasoline itself, these subsequent liquids are combined with alcohol. Biodiesel is used to fuel compression ignition engines, otherwise known as diesel engines.