Search results
Results From The WOW.Com Content Network
In manifold injection (as well as carburetors and throttle-body fuel injection), fuel can be added to the intake air mixture at any time. However a GDI engine is limited to injecting fuel during the intake and compression phases. This becomes a restriction at high engine speeds (RPM), when the duration of each combustion cycle is shorter.
Indirect injection in an internal combustion engine is fuel injection where fuel is not directly injected into the combustion chamber. Gasoline engines equipped with indirect injection systems, wherein a fuel injector delivers the fuel at some point before the intake valve, have mostly fallen out of favor to direct injection. However, certain ...
L-Jetronic was widely adopted on European cars during the 1970s and 1980s. As a system that uses electronically-controlled fuel injectors which open and close to control the amount of fuel entering the engine, the L-Jetronic system uses the same basic principles as modern electronic fuel injection (EFI) systems.
The first, called Combined Combustion System or CCS, is based on the VW Group 2.0-litre diesel engine, but uses homogeneous intake charge. It requires synthetic fuel to achieve maximum benefit. The second is called Gasoline Compression Ignition or GCI; it uses HCCI when cruising and spark ignition when accelerating.
A direct port nitrous system introduces the nitrous or fuel/nitrous mixture as close to the intake ports of the engine as is feasible via individual nozzles directly in each intake runner. Direct port nitrous systems will use the same or similar nozzles as those in single nozzle systems, just in numbers equal to or in multiples of the number of ...
The 1999–2003 trucks also had a deadhead fuel system and a "long lead" injector in cyl. number 8 due to lower fuel pressures with the deadhead design (AE code injector). The California trucks from 1996 and 1997 have a 120 cc (7.3 cu in) split-shot fuel injectors; other trucks did not get split-shot injectors until 1999.
Thus, the injectors inject the fuel through the open intake valve into the cylinder, which should not be confused with direct injection. Certain multi-point injection systems also use tubes with poppet valves fed by a central injector instead of individual injectors. Typically though, a multi-point injected engine has one fuel injector per ...
The air meter measures airflow into the engine and manages thermostatic warmup enrichment, fuel shutoff on overrun, and idle settings. These measurements are sent via pressure and vacuum signals to the fuel meter, which contains the high-pressure fuel pump and controls delivery of fuel to the injector nozzles.