Ads
related to: metri pack 480 series terminal wire
Search results
Results From The WOW.Com Content Network
Pin 1 is typically indicated on the body of the connector by a red or raised "V" mark. The corresponding wire in a ribbon cable is usually indicated by red coloration, a raised molded ridge, or markings printed onto the cable insulation. On the connector pin 2 is opposite pin 1, pin 3 is next to pin 1 along the length of the connector, and so on.
The name "tab" terminals is a description of the shape of the male terminal. Six series are covered in one of TE's catalogs (which omits the 0.375 in/9.5 mm, but mentions it elsewhere), named after their blade width in mils. [3] Insulated versions of the terminals are color-coded to indicate what wire gauges they may be used with. The terminal ...
A DEC VT100 with the VT-640 Retro-Graphics board installed. The VT640 Retro-Graphics, originally known as the VT100 Retro-Graphics, is an expansion board that was developed by Digital Engineering, Inc., for Digital Equipment Corporation's popular VT100 terminal, allowing it to be used as a graphics terminal capable of a resolution of 640 by 480 pixels.
An electric wire ferrule (sometimes electric end terminal) is a metal tube crimped over stranded wire to secure the strands within a screw terminal. Electrical insulation may be included to protect any exposed portion of the wire not completely inside the screw terminal post.
Twist-on wire connectors are not generally recommended for use with aluminum wire in the United States. [1] The U.S. Consumer Product Safety Commission disapproves wire nuts for aluminum wire; instead, special crimp connectors are called for, and as of 2011 the CPSC asserted qualified, second-preference approval of a certain kind of screw ...
The wire goes in the one near the edge, and the post is inserted into the hole in the center. Automated wire-wrap machines, as manufactured by the Gardner Denver Company in the 1960s and 1970s, were capable of automatically routing, cutting, stripping and wrapping wires onto an electronic "backplane" or "circuit board".