Search results
Results From The WOW.Com Content Network
Silicones are usually very thick (high viscosity), and must be vacuum degassed prior to pouring, to minimize bubble entrapment. If making a brush-on rubber mold, the curing time factor between coats is long (longer than urethanes or polysulfides, shorter than latex). Silicone components (A+B) must be mixed accurately by weight (scale required ...
Open time The working time to make a bond, where the surface still retains sufficient tack, can range from seconds for fast-setting HMAs to infinity for pressure-sensitive adhesives. Set time Time to form a bond of acceptable strength. Tack The degree of surface stickiness of the adhesive; influences the strength of the bond between wetted ...
The high tack material comprises about 95% of the adhesive and provides the majority of the adhesive's tackiness. [6] In addition to these 2 components, surfactants are often added to reduce the surface energy of the adhesive and facilitate adhesion to high surface energy substrates (metals, other polymeric materials). [ 11 ]
Sealant products manufactured with silyl-modified polymers generally have most of the desirable properties of acrylic- or polyurethane-based products, including high opacity, short drying time, and good paint adhesion, as well as some key properties of silicone-based products, including adhesion to a wider range of substrate materials, higher ...
In contrast, pressure-sensitive adhesives (PSAs) form a bond simply by the application of light pressure to marry the adhesive with the adherend. Pressure-sensitive adhesives are designed with a balance between flow and resistance to flow. The bond forms because the adhesive is soft enough to flow, or wet, the adherend.
Tackifiers are chemical compounds used in formulating adhesives to increase tack, the stickiness of the surface of the adhesive. [1] They are usually low-molecular weight compounds with high glass transition temperature. At low strain rate, they provide higher stress compliance [clarification needed], and become stiffer at higher strain rates.
In 1977, the production of starch- and cellulose adhesives commenced and in 1990, these were followed by the first protein-based label adhesive. [4] Coca-Cola Deutschland, which was then based in Essen asked cph in 1990, to develop a special label adhesive for PET bottles. At this time the name of the company was changed to cph Deutschland GmbH.
Loctite is an American [1] brand of adhesives, sealants, surface treatments, and other industrial chemicals that include acrylic, anaerobic, cyanoacrylate, epoxy, hot melt, silicone, urethane, and UV/light curing technologies. Loctite products are sold globally and are used in a variety of industrial and hobbyist applications.