Search results
Results From The WOW.Com Content Network
Since it would not be practical to manually provision networks at scale, in IPv6 networking, DHCPv6 prefix delegation (RFC 3633; RFC 8415 § 6.3) is used to assign a network address prefix and automate configuration and provisioning of the public routable addresses for the network. In the typical case of a home network, for example, the home ...
The Router Advertisement Daemon is used by system administrators in stateless autoconfiguration(RFC 4862. [ 3 ] ) methods of network hosts on Internet Protocol version 6 networks. When IPv6 hosts configure their network interface controllers , they multicast router solicitation (RS) requests onto the network to discover available routers.
The Dynamic Host Configuration Protocol version 6 (DHCPv6) is a network protocol for configuring Internet Protocol version 6 (IPv6) hosts with IP addresses, IP prefixes, default route, local segment MTU, and other configuration data required to operate in an IPv6 network.
A unique local address (ULA) is an Internet Protocol version 6 (IPv6) address in the address range fc00:: / 7. [1] These addresses are non-globally reachable [2] (routable only within the scope of private networks, but not the global IPv6 Internet).
IPv6 hosts are required to support multiple addresses per interface; moreover, every IPv6 host is required to configure a link-local address even when global addresses are available. IPv6 hosts may additionally self-configure additional addresses on receipt of router advertisement messages, thus eliminating the need for a DHCP server.
IPv6 hosts configure themselves automatically. Every interface has a self-generated link-local address and, when connected to a network, conflict resolution is performed and routers provide network prefixes via router advertisements. [19] Stateless configuration of routers can be achieved with a special router renumbering protocol. [20]
Main Menu. News. News
The Internet Engineering Task Force (IETF) has reserved the IPv4 address block 169.254.0.0 / 16 (169.254.0.0 – 169.254.255.255) for link-local addressing. [1] The entire range may be used for this purpose, except for the first 256 and last 256 addresses (169.254.0.0 / 24 and 169.254.255.0 / 24), which are reserved for future use and must not be selected by a host using this dynamic ...