Search results
Results From The WOW.Com Content Network
1050 aluminium alloy is an aluminium-based alloy in the "commercially pure" wrought family (1000 or 1xxx series [1]).As a wrought alloy, it is not used in castings. Instead, it is usually formed by extrusion or rolling.
Aluminum-silicon phase diagram. Aluminum forms a eutectic with silicon, which is at 577 °C, with a Si content of 12.5% [7] or 12.6%. [8] Up to 1.65% Si can be dissolved in aluminum at this temperature. However, the solubility decreases rapidly with temperature. At 500 °C it is still 0.8% Si, at 400 °C 0.3% Si and at 250 °C only 0.05% Si.
Aluminum offers lighter weight at the expense of strength, hardness and often cost. However, with care it can be substituted for many of the components and is widely used. Aluminum crank cases, cylinder blocks, heads and pistons are commonplace. The first airplane engine to fly, in the Wright Flyer of 1903, had an aluminum cylinder block. [1]
The lubricant is isolated from the external parts of the engine through various sealing mechanisms, which also prevent dirt and other foreign objects from contaminating the oil and from reaching the bearings, gears, and other moving parts, and typically flows in a loop (is not intentionally consumed through engine usage).
Parts for Ram Air V engines are not readily available. The cylinder heads on the 400 CID version had an intake port volume of 290 cc (17.70 cu in), nearly twice the size of a typical standard D-port Pontiac head - and flowed in the area of 315 cu ft/min (8.9 m 3 /min) at 0.8 in (20 mm) valve lift; in the realm of the NASCAR-dominating Chrysler ...
Reducing weight has resulted in using aluminum-silicon alloys more frequently for the engine block in small-displacement engines. Engine blocks of comparable design, but using Al-Si alloys, are not lighter than cast iron engine blocks in the same ratio as that for the specific weights of the materials.
Parts books were often issued as microfiche, though this has fallen out of favour. Now, many manufacturers offer this information digitally in an electronic parts catalogue. This can be locally installed software, or a centrally hosted web application. Usually, an electronic parts catalogue enables the user to virtually disassemble the product ...
Al–Li alloys are primarily of interest to the aerospace industry for their weight advantage. On narrow-body airliners, Arconic (formerly Alcoa) claims up to 10% weight reduction compared to composites, leading to up to 20% better fuel efficiency, at a lower cost than titanium or composites. [8]