Search results
Results From The WOW.Com Content Network
P-Motor was the class designation given by the New York Central a fleet of 22 ALCO-GE electric passenger locomotives. The P Motors were not only more powerful than previous New York Central electrics, but also a more advanced design using the highly successful 2-C+C-2 wheel arrangement found on the later PRR GG1 and New Haven EP-3 classes as well as nose suspended traction motors.
The Turbomeca Arrius is one of a family of turboshaft engines for helicopter use, first produced in 1981. As of 2012, some 2,700 units had been sold. As of 2012, some 2,700 units had been sold. Power ranges between 357 kW (479 shp) and 530 kW (716 shp) for different versions.
There are 4,096 total radiators, 4,352 receivers, and 128 auxiliary elements on each antenna array. The power requirement of SPY-1A is four times that of the AN/SPS-48. The AN/UYK-7 computer controls SPY-1. [5]: 316–317 SPY-1A is a development of SPY-1, resulting from the deployment of SPY-1-equipped USS Ticonderoga off the Lebanese coast. It ...
Average fuel consumption is about 950 lb. per hour for a 7,765 lbf engine on a G280, to be compared to 875 lb. per hour for a 4,420 lbf TFE731 on a G150. [3] More than 3.5 million flight hours have been logged till October 2017, and the 2,000th engine should be delivered in 2018. [2] Honeywell maintenance program is $447 for two engines per ...
The Turbomeca Arriel is a series of French turboshaft engines that first ran in 1974. [1] Delivering 650 to 1,000 hp (480 to 750 kW), over 12,000 Arriel engines have been produced from 1978 to 2018, logging more than 50 million flight hours for 40 helicopter applications.
The Payload Assist Module (PAM) is a modular upper stage designed and built by McDonnell Douglas , using Thiokol Star-series solid propellant rocket motors. The PAM was used with the Space Shuttle , Delta , and Titan launchers and carried satellites from low Earth orbit to a geostationary transfer orbit or an interplanetary course.
[1] R1.0 adopted January 3, 2005 ECN-001 adopted June 2006 R2.0 adopted November 15, 2006. An AMC card can use proprietary LVDS-based signaling, or one of the following AMC specifications: AMC.1 PCI Express (and PCI Express Advanced Switching) AMC.2 Gigabit Ethernet and XAUI (ratified) AMC.3 Storage (ratified) AMC.4 Serial RapidIO (ratified)
Additional to the traditional screw contacts the electrical connection between the module and other parts of the power electronic system can also be achieved by pin contacts (soldered onto a PCB), press-fit contacts pressed into PCB vias, spring contacts that inherently press on contact areas of a PCB or by pure pressure contact where corrosion-proof surface areas are directly pressed together ...