Search results
Results From The WOW.Com Content Network
A laser beam profiler captures, displays, and records the spatial intensity profile of a laser beam at a particular plane transverse to the beam propagation path. Since there are many types of lasers— ultraviolet , visible , infrared , continuous wave , pulsed, high-power, low-power—there is an assortment of instrumentation for measuring ...
Tophat beams are often used in industry, for example for laser drilling of holes in printed circuit boards. They are also used in very high power laser systems, which use chains of optical amplifiers to produce an intense beam. Tophat beams are named for their resemblance to the shape of a top hat.
In Canada, steel I-beams are now commonly specified using the depth and weight of the beam in metric terms. For example, a "W250x33" beam is approximately 250 millimetres (9.8 in) in depth (height of the I-beam from the outer face of one flange to the outer face of the other flange) and weighs approximately 33 kg/m (22 lb/ft; 67 lb/yd). [8]
Pre-cast concrete beams may be delivered on site to be installed for the second floor, after which a concrete slab may be poured for the pavement area. This can be done for multiple stories. [17] A parking garage of this type is just one possible example of many structures that may use both reinforced concrete and structural steel.
In this example the truss is a group of triangular units supporting the bridge. Typical detail of a steel truss, which is considered as a revolute joint Historical detail of a steel truss with an actual revolute joint. A truss is an assembly of members such as beams, connected by nodes, that creates a rigid structure. [1]
Cross-sections of continuously rolled structural shapes, showing the change induced by each rolling mill. Structural shape rolling, also known as shape rolling and profile rolling, [1] is the rolling and roll forming of structural shapes by passing them through a rolling mill to bend or deform the workpiece to a desired shape while maintaining a constant cross-section.
Half-hipped (clipped gable, jerkinhead [7]): A combination of a gable and a hip roof (pitched roof without changes to the walls) with the hipped part at the top and the gable section lower down. Dutch gable, gablet : A hybrid of hipped and gable with the gable (wall) at the top and hipped lower down; i.e. the opposite arrangement to the half ...
The diameter of the multimode beam is then M times that of the embedded Gaussian beam everywhere, and the divergence is M times greater, but the wavefront curvature is the same. The multimode beam has M 2 times the beam area but 1/M 2 less beam intensity than the embedded beam. This holds true for any given optical system, and thus the minimum ...