Search results
Results From The WOW.Com Content Network
Since 10 meters can frequently open up to propagate globally, most 10-meter repeaters use a CTCSS sub-audible access tone. 16 kHz-wide signals with 5 kHz deviation is normal in this band. 8 kHz-wide signals with 2.5 kHz deviation can also be found. 2.5kHz deviation is mandated by FCC rules below 29.0 MHz.
The nominal "17 m" band actually covers 16.6–16.5 m. The nominal "15 m" band actually ranges from 14.28–13.98 m. By common sense, the "15 m" band ought to be called "14 m", but that name has been in longtime use for a shortwave broadcast band. 80 metres or 80 / 75 meters – 3 500–4 000 kHz – 85.65–74.95 m actual
A reduction of the number of telegraphy examination element levels from three to one. Both the Amateur Extra Class' 20 words-per-minute (WPM); and General and Advanced classes' 13 WPM Morse code tests, were removed in favor of a standardized 5 WPM as the sole Morse code requirement for both the General and Extra Class licenses.
Due to unpredictable and intermittent long-distance propagation, usually achieved by a combination of ionospheric conditions, beacons are very important in providing early warning for 6-meter band (50 MHz) openings. Beacons traditionally operate in the lower part of the band, in the range 50.000 MHz to 50.080 MHz.
Morse code is called the original digital mode. Radio telegraphy, designed for machine-to-machine communication is the direct on / off keying of a continuous wave carrier by Morse code symbols, often called amplitude-shift keying or ASK, may be considered to be an amplitude modulated mode of communications, and is rightfully considered the first digital data mode.
FM is recognized for its superior audio quality, whereas SSB is more efficient for long-range communication under limited bandwidth conditions. [16] Radiotelegraphy using Morse code, also known as "CW" from "continuous wave", is the wireless extension of landline (wired) telegraphy developed by Samuel Morse and
Chart of the Morse code 26 letters and 10 numerals [1]. This Morse key was originally used by Gotthard railway, later by a shortwave radio amateur [2]. Morse code is a telecommunications method which encodes text characters as standardized sequences of two different signal durations, called dots and dashes, or dits and dahs.
The Amateur Station Operator's Licence, General Grade, requires a minimum of 50% in each section of the written examination, and 60% overall, and a demonstration of proficiency in sending and receiving Morse code at 8 words per minute (without errors for each). [10]