Search results
Results From The WOW.Com Content Network
An order of magnitude of time is usually a decimal prefix or decimal order-of-magnitude quantity together with a base unit of time, like a microsecond or a million years. In some cases, the order of magnitude may be implied (usually 1), like a "second" or "year". In other cases, the quantity name implies the base unit, like "century". In most ...
A microsecond is to one second, as one second is to approximately 11.57 days. A microsecond is equal to 1000 nanoseconds or 1 ⁄ 1,000 of a millisecond. Because the next SI prefix is 1000 times larger, measurements of 10 −5 and 10 −4 seconds are typically expressed as tens or hundreds of microseconds.
Ten seconds (one sixth of a minute) minute: 60 s: hectosecond: 100 s: milliday: 1/1000 d (0.001 d) 1.44 minutes, or 86.4 seconds. Also marketed as a ".beat" by the Swatch corporation. moment: 1/40 solar hour (90 s on average) Medieval unit of time used by astronomers to compute astronomical movements, length varies with the season. [4]
A millisecond (from milli-and second; symbol: ms) is a unit of time in the International System of Units equal to one thousandth (0.001 or 10 −3 or 1 / 1000) of a second [1] [2] or 1000 microseconds.
The commission rejected the seconds-pendulum definition of the metre the following year because the second of time was an arbitrary period equal to 1/86,400 day, rather than a decimal fraction of a natural unit. Instead, the metre would be defined as a decimal fraction of the length of the Paris Meridian between the equator and the North Pole.
For others, there would be 50 decimal minutes per decimal hour, and 100 decimal seconds per decimal minute. His new hours, minutes, and seconds would thus be more similar to the old units. [14] C.A. Prieur (of the Côte-d'Or), read at the National Convention on Ventôse 11, year III (March 1, 1795):
The packet transmission time in seconds can be obtained from the packet size in bit and the bit rate in bit/s as: Packet transmission time = Packet size / Bit rate. Example: Assuming 100 Mbit/s Ethernet, and the maximum packet size of 1526 bytes, results in Maximum packet transmission time = 1526×8 bit / (100 × 10 6 bit/s) ≈ 122 μs
The factor–label method can convert only unit quantities for which the units are in a linear relationship intersecting at 0 (ratio scale in Stevens's typology). Most conversions fit this paradigm. An example for which it cannot be used is the conversion between the Celsius scale and the Kelvin scale (or the Fahrenheit scale). Between degrees ...