Search results
Results From The WOW.Com Content Network
The density of solid clay bricks is around 2000 kg/m 3: this is reduced by frogging, hollow bricks, and so on, but aerated autoclaved concrete, even as a solid brick, can have densities in the range of 450–850 kg/m 3. Bricks may also be classified as solid (less than 25% perforations by volume, although the brick may be "frogged," having ...
Density system unit unit-code symbol or abbrev. notes sample default conversion combination output units Metric: kilogram per cubic metre: kg/m3 kg/m 3: 1.0 kg/m 3 (1.7 lb/cu yd)
The kilogram per cubic metre (symbol: kg·m −3, or kg/m 3) is the unit of density in the International System of Units (SI). It is defined by dividing the SI unit of mass, the kilogram, by the SI unit of volume, the cubic metre. [1]
Fly ash bricks. Fly ash brick (FAB) is a building material, specifically masonry units, containing class C or class F fly ash and water. Compressed at 28 MPa (272 atm) and cured for 24 hours in a 66 °C steam bath, then toughened with an air entrainment agent, the bricks can last for more than 100 freeze-thaw cycles.
In Germany, clinker bricks (German: Klinkerziegel) are named according to the German Institute for Standardization's DIN 105. They differ between full clinker (KMz) with a density of 2.0 to 2.2 kg/dm 3 (120 to 140 lb/cu ft) and high hole clinker (KHLz) with a density of 1.6 to 1.8 kg/dm 3 (100 to 112 lb/cu ft). Because of their low porosity ...
Brick #2: 76.52%SiO 2, 13.67%Al 2 O 3, 6.77%Fe 2 O 3, 1.77%CaO, 0.42%MgO, 0.27%MnO, no specified density. Judging from the descriptions the TPRC has put the wrong labels on their bricks, and if that is the case then Brick #1 is "Common Brick" and Brick #2 is "Red Brick."
the medium gross density of 850 kg/m 3 to 1.100 kg/m 3 (white coloured blocks, suitable for standard usage) the high gross density blocks of 1.100 kg/m 3 to 1.500 kg/m 3 (reddish colour, suitable for walls with higher acoustic performance requirements) The dimensions of these blocks are: length 500 mm, height 500 mm. Four blocks thus make 1 m 2.
— "Values ranging from 21.3 to 21.5 gm/cm 3 at 20 °C have been reported for the density of annealed platinum; the best value being about 21.45 gm/cm 3 at 20 °C." 21.46 g/cm 3 — Rose, T. Kirke. The Precious Metals, Comprising Gold, Silver and Platinum .