Search results
Results From The WOW.Com Content Network
R-410A is sold under the trademarked names AZ-20, EcoFluor R410, Forane 410A, Genetron R410A, Puron, and Suva 410A. On December 27, 2020, the United States Congress passed the American Innovation and Manufacturing (AIM) Act, which directs US Environmental Protection Agency (EPA) to phase down production and consumption of hydrofluorocarbons (HFCs).
Because of its reduced global warming potential (GWP), R-454B is intended to be an alternative to refrigerant R-410A in new equipment. [2] [3] [4] R-454B has a GWP of 466, which is 78 percent lower than R-410A's GWP of 2088. [2] R-454B is non-toxic and mildly flammable, with an ASHRAE safety classification of A2L. In the United States, it is ...
Originally, Section 612 was limited by ozone-depleting chemicals. However, after passing regulations to phase-out R134a, an HFC refrigerant with no ozone-depleting potential, this phase-out was defended by a subsidiary of DuPont siding with the EPA as it was challenged by a major manufacturer of R134a, and was struck down in 2017.
Being phased out: A widely used hydrochlorofluorocarbon (HCFC) and powerful greenhouse gas with a GWP equal to 1810. Worldwide production of R-22 in 2008 was about 800 Gg per year, up from about 450 Gg per year in 1998. R-438A (MO-99) is a R-22 replacement. [71] R-123 HCFC-123 CHCl 2 CF 3: 2,2-Dichloro-1,1,1-trifluoroethane: 292 79 US phase-out
As a result of CFCs contributing to ozone depletion in the upper atmosphere, the manufacture of such compounds has been phased out under the Montreal Protocol, and they are being replaced with other products such as hydrofluorocarbons (HFCs) and hydrofluoroolefins (HFOs) [1] including R-410A, R-134a and R-1234yf.
For new construction, this refrigerant is being phased out in favor of the ozone-friendly but potent greenhouse gas R410A. Open-loop systems (i.e. those that draw ground water as opposed to closed-loop systems using a borehole heat exchanger) need to be balanced by reinjecting the spent water.
The EPA defines refrigerant reclamation as "Reclaim refrigerant means to reprocess refrigerant to at least the purity specified in appendix A to 40 CFR part 82, subpart F (based on AHRI Standard 700–1993, Specifications for Fluorocarbon and Other Refrigerants) and to verify this purity using the analytical methodology prescribed in appendix A ...
The common refrigerant R-410A is a zeotropic, 50/50-mass-percent mixture of difluoromethane and pentafluoroethane . Pentafluoroethane is a common replacement for various chlorofluorocarbons (i.e Freon ) in new refrigerant systems, especially for air-conditioning.