Ad
related to: sata vs iii compatibility table for computer memory stick stickers
Search results
Results From The WOW.Com Content Network
Standard goes up to 128 TB (not compatible with older host devices). SmartMedia: Toshiba: 3.3/5 V 1995 128 MB Very slim (45.0 mm × 37.0 mm × 0.76 mm), no wear leveling controller, up to 128 MB. This particular example shows the write protect sticker (the silver disc). Memory Stick: Sony, SanDisk: Standard 1998 128 MB
A 3.5-inch Serial ATA hard disk drive A 2.5-inch Serial ATA solid-state drive. SATA was announced in 2000 [4] [5] in order to provide several advantages over the earlier PATA interface such as reduced cable size and cost (seven conductors instead of 40 or 80), native hot swapping, faster data transfer through higher signaling rates, and more efficient transfer through an (optional) I/O queuing ...
The physical phenomena on which the device relies (such as spinning platters in a hard drive) will also impose limits; for instance, no spinning platter shipping in 2009 saturates SATA revision 2.0 (3 Gbit/s), so moving from this 3 Gbit/s interface to USB 3.0 at 4.8 Gbit/s for one spinning drive will result in no increase in realized transfer rate.
The SAS is a new generation serial communication protocol for devices designed to allow for much higher speed data transfers and is compatible with SATA. SAS uses a mechanically identical data and power connector to standard 3.5-inch SATA1/SATA2 HDDs, and many server-oriented SAS RAID controllers are also capable of addressing SATA hard drives.
AHCI is separate from the SATA 3 Gbit/s standard, although it exposes SATA's advanced capabilities (such as hot swapping and native command queuing) such that host systems can utilize them. For modern solid state drives, the interface has been superseded by NVMe. [2] The current version of the specification is 1.3.1.
Later, the micro-SATA interface made the total length 78.5mm. 1.8-inch drives with ZIF connectors were used in digital audio players, such as the iPod Classic , and subnotebooks . Later 1.8-inch drives were updated with a micro-SATA connector and up to 320GB of storage (Toshiba MK3233GSG).
SATA is a computer bus interface for connecting host bus adapters to mass storage devices such as hard disk drives and optical drives. eSATA is a SATA connector accessible from outside the computer, to provide a signal (but not power) connection for external storage devices. [3]
For general computer use, the 2.5-inch form factor (typically found in laptops and used for most SATA SSDs) is the most popular, in three thicknesses [98] (7.0mm, 9.5mm, 14.8 or 15.0mm; with 12.0mm also available for some models). For desktop computers with 3.5-inch hard disk drive slots, a simple adapter plate can be used to make such a drive fit.