Search results
Results From The WOW.Com Content Network
The area required to calculate the volumetric flow rate is real or imaginary, flat or curved, either as a cross-sectional area or a surface. The vector area is a combination of the magnitude of the area through which the volume passes through, A , and a unit vector normal to the area, n ^ {\displaystyle {\hat {\mathbf {n} }}} .
The cone acts as a conditioning device as well as a differential pressure producer. Upstream requirements are between 0–5 diameters compared to up to 44 diameters for an orifice plate or 22 diameters for a Venturi. Because cone meters are generally of welded construction, it is recommended they are always calibrated prior to service.
A Marsh funnel is a Marsh cone with a particular orifice and a working volume of 1.5 litres. It consists of a cone 6 inches (152 mm) across and 12 inches in height (305 mm) to the apex of which is fixed a tube 2 inches (50.8 mm) long and 3/16 inch (4.76 mm) internal diameter. A 10-mesh screen is fixed near the top across half the cone. [2]
A set of communicating vessels Animation showing the filling of communicating vessels. Communicating vessels or communicating vases [1] are a set of containers containing a homogeneous fluid and connected sufficiently far below the top of the liquid: when the liquid settles, it balances out to the same level in all of the containers regardless of the shape and volume of the containers.
Ships in that size range can carry between 2.5 million and 3.5 million gallons of fuel. The amount of fuel actually be used on a sailing depends primarily on the ship's speed.
Used mainly to determine the minimum water depth for safe passage of a vessel and to calculate the vessel's displacement (obtained from ship's stability tables) so as to determine the mass of cargo on board. Draft, Air – Air Draft/Draught is the distance from the water line to the highest point on a ship (including antennas) while it is ...
Day shapes are black in color and their sizes are determined by the ColRegs; for example, the size of the ball is not less than 0.6 metres (2.0 ft). The vertical distance between shapes is at least 1.5 metres (4.9 ft). Vessels of less than 20 metres (66 ft) length may use shapes of smaller size commensurate with the size of the vessel. [2]
Both the conical plate centrifuge and chamber bowl centrifuge can be used for liquid/liquid and solid/liquid separation. However, the advantage of conical plate centrifuge over chamber bowl centrifuge is that solid discharge is possible in conical plate. The chamber bowl has a high capacity for solids but there is no solid discharge.