Search results
Results From The WOW.Com Content Network
[35] [36] Car and Driver magazine, for example, though praising the GT500 for its ample horsepower and relatively smooth ride, criticized their test car for its heavy weight and, in particular, the nose-heavy weight distribution of 57.7% front and 42.3% rear (compared to the 52.5% front, 47.5% rear of a Mustang GT manual they tested). [37]
The 2007 Mustang GT owner's manual specified the use of 3.0 L of non-synthetic Mercon ATF in the 3650, while the 2008 Mustang GT owner's manual now specifies the use of 3.0 L of Mercon-V ATF in the 3650. Dexron III/Mercon Non-Synthetic ATF seems to work best for pre-2005 Mustang GTs.
Though initially used in the 1994 and 1995 Mustang GTS, GT and Cobra, Ford retired the 302 cid pushrod small-block V8 after nearly 30 years of use, replacing it with the newer Modular 4.6 L (281 cu in) SOHC V8 in the 1996 Mustang GT. The 4.6 L V8 was initially rated at 215 bhp (160 kW), 1996–1997, but was later increased to 225 bhp (168 kW ...
For this reason weight distribution varies with the vehicle's intended usage. For example, a drag car maximizes traction at the rear axle while countering the reactionary pitch-up torque. It generates this counter-torque by placing a small amount of counterweight at a great distance forward of the rear axle.
An American commercial car carrier typically fits between 5 and 9 cars, depending on the car size and trailer model (capacity is limited by an 80,000 lb weight cap that a road vehicle is subject to under U.S. law. [1] [irrelevant citation]). Significantly higher-capacity vehicles have been observed around the world, such as a side-by-side ...
The Mustang GT also featured a stiffer handling suspension, a 3.08:1 rear axle ratio (later changed to 3.27:1 or 3.55:1 depending on the transmission and model year), dual exhaust tips, and larger 16-inch (410 mm) wheels (compared to the base Mustang's 15-inch wheels). The 1994 Mustang GT was named Motor Trend Car of the Year.
The FR500C can either be obtained as a turnkey costing $125,000 or by modding an existing Mustang GT with specified parts from Ford Racing. [2] It is also known by its nickname "Boy Racer", assigned by Ford executives. This model won the manufacturers title in the Koni Challenge racing series in 2005 & 2008. This was after several attempts to ...
CMVs are restricted by gross weight (total weight of vehicle and cargo), and by axle weight (i.e., the weight carried by each tire). The federal weight limits for CMVs are 80,000 pounds (36,000 kg) for gross weight (unless the bridge formula dictates a lower limit), 34,000 pounds (15,000 kg) for a tandem axle, and 20,000 pounds (9,100 kg) for a ...