Ads
related to: tantalum dry etching
Search results
Results From The WOW.Com Content Network
Dry etching refers to the removal of material, typically a masked pattern of semiconductor material, by exposing the material to a bombardment of ions (usually a plasma of reactive gases such as fluorocarbons, oxygen, chlorine, boron trichloride; sometimes with addition of nitrogen, argon, helium and other gases) that dislodge portions of the material from the exposed surface.
Etching tanks used to perform Piranha, hydrofluoric acid or RCA clean on 4-inch wafer batches at LAAS technological facility in Toulouse, France. Etching is used in microfabrication to chemically remove layers from the surface of a wafer during manufacturing. Etching is a critically important process module in fabrication, and every wafer ...
A reactive-ion etching setup in a laboratory cleanroom. Reactive-ion etching (RIE) is an etching technology used in microfabrication. RIE is a type of dry etching which has different characteristics than wet etching. RIE uses chemically reactive plasma to remove material deposited on wafers.
Wet etching was widely used in the 1960s and 1970s, [144] [145] but it was replaced by dry etching/plasma etching starting at the 10 micron to 3 micron nodes. [146] [147] This is because wet etching makes undercuts (etching under mask layers or resist layers with patterns). [148] [149] [150] Dry etching has become the dominant etching technique ...
The RCA clean is a standard set of wafer cleaning steps which need to be performed before high-temperature processing steps (oxidation, diffusion, CVD) of silicon wafers in semiconductor manufacturing.
The dry etch is then performed so that structured etching is achieved. After the process, the remaining photoresist has to be removed. This is also done in a special plasma etcher, called an asher. [14] Dry etching allows a reproducible, uniform etching of all materials used in silicon and III-V semiconductor technology. By using inductively ...