Ads
related to: sas disk drive
Search results
Results From The WOW.Com Content Network
In computing, Serial Attached SCSI (SAS) is a point-to-point serial protocol that moves data to and from computer-storage devices such as hard disk drives, solid-state drives and tape drives. SAS replaces the older Parallel SCSI (Parallel Small Computer System Interface, usually pronounced "scuzzy" [ 3 ] [ 4 ] ) bus technology that first ...
Enhanced Small Disk Interface (ESDI) was an attempt to minimize controller design time by supporting multiple data rates with a standard data encoding scheme; this was usually negotiated automatically by the disk drive and controller; most of the time, however, 15 or 20 megabit ESDI disk drives were not downward compatible (i.e. a 15 or 20 ...
SAS (Serial Attached SCSI) is the interface architecture used to transmit data from the storage controllers to the disk drives in the Adaptable Modular Storage 2000 family. The SAS interface is a full duplex, point-to-point architecture with up to 9600 MB/sec of total system bandwidth and up to 32 links available for concurrent I/O activity.
SSA disk drives include a "unitized" composite connector; SAS disk drives have an SFF-8482 connector. This is "form factor compatible" with the connector on SATA disk drives, meaning that a SATA drive may be installed in an SAS drive bay, and the enclosure can use the Serial ATA Tunneling Protocol (STP) to make use of the drive.
For example, a high-end disk subsystem may be a single SCSI device but contain dozens of individual disk drives, each of which is a logical unit. Further, a RAID array may be a single SCSI device, but may contain many logical units, each of which is a "virtual" disk—a stripe set or mirror set constructed from portions of real disk drives.
The format was standardized as EIA-741 and co-published as SFF-8501 for disk drives, with other SFF-85xx series standards covering related 5.25 inch devices (optical drives, etc.) [33] The Quantum Bigfoot HDD was the last to use it in the late 1990s, with "low-profile" (≈25 mm) and "ultra-low-profile" (≈20 mm) high versions.
a mixture of Serial attached SCSI (SAS) and midline SAS disk drives configured as RAID 1 (2D+2D and 4D+4D), RAID 5 (3D+1P, 7D+1P, 14D+2P and 28D+4P) and RAID 6 (6D+2P) from 5 – 2048 disk drives for 2 PB of raw capacity; up to 1 TiB flash-protected (backup will last indefinitely), mirrored write cache
A disk array controller provides front-end interfaces and back-end interfaces. The back-end interface communicates with the controlled disks. Hence, its protocol is usually ATA (a.k.a. PATA), SATA, SCSI, FC or SAS.