Search results
Results From The WOW.Com Content Network
Windows: MIT GUI IDE(PATA), SATA, NVMe eSATA, USB, IEEE 1394: Several RAID controllers [4] Yes No Mail, sound and popup Sister utility to CrystalDiskMark. Has AAM/APM control. Defraggler: Windows: Freeware: GUI IDE(PATA), SATA eSATA, USB No Yes No No Primarily a defragmenter; supports basic S.M.A.R.T. stat display, includes the one-word summary ...
Some operating systems, notably Windows Vista, Windows 7, Windows 8, Windows 8.1 and Windows 10, do not configure themselves to load the AHCI driver upon boot if the SATA controller was not in AHCI mode at the time the operating system was installed. Although this is an easily rectifiable condition, it remains an ongoing issue with the AHCI ...
The NVM Express (NVMe) standard also supports command queuing, in a form optimized for SSDs. [17] NVMe allows multiple queues for a single controller and device, allowing at the same time much higher depths for each queue, which more closely matches how the underlying SSD hardware works.
The SAS is a new generation serial communication protocol for devices designed to allow for much higher speed data transfers and is compatible with SATA. SAS uses a mechanically identical data and power connector to standard 3.5-inch SATA1/SATA2 HDDs, and many server-oriented SAS RAID controllers are also capable of addressing SATA hard drives.
For example, they may be part of a RAID subsystem in which the RAID controller sees the S.M.A.R.T.-capable drive, but the host computer sees only a logical volume generated by the RAID controller. On the Windows platform, many programs designed to monitor and report S.M.A.R.T. information will function only under an administrator account.
A SATA 3.0 controller that provides RAID functionality through proprietary firmware and drivers. Software-implemented RAID is not always compatible with the system's boot process, and it is generally impractical for desktop versions of Windows. However, hardware RAID controllers are expensive and proprietary.
F6 disk is a colloquial name for a floppy disk containing a device driver that enables Windows Setup to install Microsoft Windows on storage devices based on SCSI, SATA, or RAID technologies. All versions of the Windows NT family prior to Windows Vista required F6 disks.
When enabled via the AHCI controller, this allows the SATA host bus adapter to enter a low-power state during periods of inactivity, thus saving energy. The drawback to this is increased periodic latency as the drive must be re-activated and brought back on-line before it can be used, and this will often appear as a delay to the end-user.