Search results
Results From The WOW.Com Content Network
Then, the command ipconfig /renew is executed to request a new IP address. [ 3 ] [ 4 ] Where a computer is connected to a cable or DSL modem, it may have to be plugged directly into the modem network port to bypass the router, before using ipconfig /release and turning off the power for a period of time, to ensure that the old IP address is ...
The Hayes command set (also known as the AT command set) is a specific command language originally developed by Dale Heatherington and Dennis Hayes [1] [2] for the Hayes Smartmodem in 1981. The command set consists of a series of short text strings which can be combined to produce commands for operations such as dialing, hanging up, and ...
Reboot your modem/router - Sometimes the old "turn it off and on again" approach actually does work! Just wait about five minutes before turning it back on to make sure everything was reset. Just wait about five minutes before turning it back on to make sure everything was reset.
Modems always start out in command mode when powered up. Here are the ways a modem can switch to data mode: After a successful dial-out connection in response to an "ATD" dial command in which the modem reaches another modem. After answering the phone with the "ATA" answer command, if another modem is on the other end.
On the Windows platform, this command is available only if the Internet Protocol (TCP/IP) protocol is installed as a component in the properties of a network adapter in Network Connections. On the Windows platform running Remote Desktop Services (formerly Terminal Services) it will only show connections for the current user, not for the whole ...
2. Enter your username or email address and password. 3. Click Sign On. 4. Add your location name and connection type. 5. Click Next twice. 6. Select your dialing options. 7. Click Next. 8. Enter your Area Code and click Next. 9. Select 2-3 AOL access phone numbers. 10. Click Next twice to confirm your choices. 11. Click Save and then Save Changes.
Command Prompt, also known as cmd.exe or cmd, is the default command-line interpreter for the OS/2, [1] eComStation, ArcaOS, Microsoft Windows (Windows NT family and Windows CE family), and ReactOS [2] operating systems.
COMMAND: The command to run (add, delete, change, get, monitor, flush)-net: <dest> is a network address-host: <dest> is host name or address (default)-netmask: the mask of the route <dest>: IP address or host name of the destination <gateway>: IP address or host name of the next-hop router