Ad
related to: austenite stabilizer elements in steel
Search results
Results From The WOW.Com Content Network
Austenite, also known as gamma-phase iron (γ-Fe), is a metallic, non-magnetic allotrope of iron or a solid solution of iron with an alloying element. [1] In plain-carbon steel , austenite exists above the critical eutectoid temperature of 1000 K (727 °C); other alloys of steel have different eutectoid temperatures.
300 series stainless steels are the larger subgroup. The most common austenitic stainless steel and most common of all stainless steel is Type 304, also known as 18/8 or A2. Type 304 is extensively used in such items as cookware, cutlery, and kitchen equipment. Type 316, also known as A4, is the next most common austenitic stainless steel.
Austempering is heat treatment that is applied to ferrous metals, most notably steel and ductile iron. In steel it produces a bainite microstructure whereas in cast irons it produces a structure of acicular ferrite and high carbon, stabilized austenite known as ausferrite. It is primarily used to improve mechanical properties or reduce ...
HY-80 is prone to the formation of martensite and martensite's peak hardness is dependent on its carbon content. HY-80 is an FCC material that allows carbon to more readily diffuse than in FCC materials such as austenitic stainless steel. Nickel – Adds to toughness and ductility to the HY-80 and is also an austenite stabilizer.
Alloying elements can have an effect on the eutectoid temperature. Manganese and nickel lower the eutectoid temperature and are known as austenite stabilizing elements. With enough of these elements the austenitic structure may form at room temperature. Carbide-forming elements raise the eutectoid temperature and stabilize ferrites. [1]: 395–396
For a eutectoid steel (0.76% C), between 6 and 10% of austenite, called retained austenite, will remain. The percentage of retained austenite increases from insignificant for less than 0.6% C steel, to 13% retained austenite at 0.95% C and 30–47% retained austenite for a 1.4% carbon steel. A very rapid quench is essential to create martensite.
The main differences in composition, when compared with austenitic stainless steel is that duplex steels have a higher chromium content, 20–28%; higher molybdenum, up to 5%; lower nickel, up to 9% and 0.05–0.50% nitrogen. Both the low nickel content and the high strength (enabling thinner sections to be used) give significant cost benefits.
Stainless steel is one of the most commonly used metals in many industries. Solid solution strengthening of steel is one of the mechanisms used to enhance the properties of the alloy. Austenitic steels mainly contain chromium, nickel, molybdenum, and manganese. [13]