Ad
related to: 4000 l hr to gpm fast dry hose pump conversion table
Search results
Results From The WOW.Com Content Network
K-Factors have also previously been calculated and published using the United States customary units of pound per square inch (psi) and gallon per minute (gpm). Within the United States, US measurements are still often used instead of metric. [3] [4]
1-inch hose with 1-8 NH NFPA threads (NFPA 1963 requirement; a.k.a. "Chemical Hose Thread" and "Booster Hose Thread" [7]; the chemical hose thread term likely originates from its use on chemical fire engines, an early firefighting device used from 1872 until the 1930s that used a combination of bicarbonate of soda and sulfuric acid to force ...
Adapter used to attach a smaller diameter source hose to a larger diameter receiving hose. Indian pump (aka Indian tank) A brand of five-gallon water can, or back-pack bladder, featuring a short hose and hand pump for use in wildland firefighting. Intake Part of pump where water enters when pump forms partial vacuum. In-line eductor
In the United States, NFPA 1901 requires engines to have suction hose that matches the engine's pump rating. [12] For example, an engine with a 1,000-US-gallon (3,800 L) per minute pump is required to carry 5-inch (13 cm) or larger hose, [1]: 181 while a wildland fire engine will typically carry 2-to-2.5-inch (5.1 to 6.4 cm) hard suction hose.
This class of pump is often called a "hose pump". The biggest advantage with the hose pumps over the roller pumps is the high operating pressure of up to 16 bar. With rollers, max pressure can arrive up to 12 bar (170 psi) without any problem. If the high operating pressure is not required, a tubing pump is a better option than a hose pump if ...
External access point for fire sprinkler and dry standpipe at a building in San Francisco, US Antique wet standpipe preserved at Edison and Ford Winter Estates. A standpipe or riser is a type of rigid water piping which is built into multi-story buildings in a vertical position, or into bridges in a horizontal position, to which fire hoses can be connected, allowing manual application of water ...
Different types of pumps are suitable for different applications, for example: a pump's maximum lift height also determines the applications it can be used for. Low-lift pumps are only suitable for the pumping of surface water (e.g., irrigation, drainage of lands, ...), while high-lift pumps allow deep water pumping (e.g., potable water pumping ...
The user (most likely a fire department) attaches a hose to the fire hydrant, then opens a valve on the hydrant to provide a powerful flow of water, on the order of 350 kilopascals (51 psi); this pressure varies according to region and depends on various factors (including the size and location of the attached water main).