Search results
Results From The WOW.Com Content Network
Mask ROMs used to be the most inexpensive, and are the simplest semiconductor memory devices, with only one metal layer and one polysilicon layer, making it the type of semiconductor memory with the highest manufacturing yield [3] (the highest number of working devices per manufacturing run). ROM can be made using one of several semiconductor ...
[1] [2] A random-access memory device allows data items to be read or written in almost the same amount of time irrespective of the physical location of data inside the memory, in contrast with other direct-access data storage media (such as hard disks and magnetic tape), where the time required to read and write data items varies significantly ...
It is one type of read-only memory (ROM). PROMs are used in digital electronic devices to store permanent data, usually low level programs such as firmware or microcode. The key difference from a standard ROM is that the data is written into a ROM during manufacture, while with a PROM the data is programmed into them after manufacture. Thus ...
These use from 1 to 4 device pins and allow devices to use packages with 8 pins or less. A typical EEPROM serial protocol consists of three phases: OP-code phase, address phase and data phase. The OP-code is usually the first 8 bits input to the serial input pin of the EEPROM device (or with most I²C devices, is implicit); followed by 8 to 24 ...
Therefore, it is used for the memory in portable devices, which don't have disks, and for removable memory cards among other uses. Major types are: [7] [8] ROM (Read-only memory) – This is designed to hold permanent data, and in normal operation is only read from, not written to. Although many types can be written to, the writing process is ...
CD-ROM drives are rated with a speed factor relative to music CDs. If a CD-ROM is read at the same rotational speed as an audio CD, the data transfer rate is 150 Kbyte/s, commonly called "1×" (with constant linear velocity, short "CLV"). At this data rate, the track moves along under the laser spot at about 1.2 m/s.
It is an array of floating-gate transistors individually programmed by an electronic device that supplies higher voltages than those normally used in digital circuits. Once programmed, an EPROM can be erased by exposing it to strong ultraviolet (UV) light source (such as from a mercury-vapor lamp ).
A ROM dumping device for the Game Boy Advance. ROMs can be copied from the read-only memory chips found in cartridge-based games and many arcade machines using a dedicated device in a process known as dumping. For most common home video game systems, these devices are widely available, examples being the Doctor V64, or the Retrode.