Search results
Results From The WOW.Com Content Network
The collective pitch control, or collective lever, is normally located on the left side of the pilot's seat with an adjustable friction control to prevent inadvertent movement. The collective changes the pitch angle of all the main rotor blades collectively (i.e., all at the same time) and is independent of their position in the rotational cycle.
Cyclic/collective pitch mixing (CCPM) is a control concept employed in collective pitch radio-controlled helicopters. [1] CCPM reduces mechanical complexity and increases precision of control of the helicopter rotor's swashplate. Unlike conventional systems in which a single actuator is responsible for a single axis, CCPM mechanisms allow ...
To control the collective pitch of the main rotor blades, the entire swashplate must be moved up or down along its axis without changing the orientation of the cyclic controls. Conventionally, each control mechanism, (roll, pitch, and collective) had an individual actuator responsible for the movement.
Collective pitch varies the magnitude of rotor thrust by increasing or decreasing thrust over the whole rotor disc at the same time. These blade pitch variations are controlled by tilting, raising, or lowering the swash plate with the flight controls.
RC helicopters generally require between 3 and 7 channels for control (although micro helicopters that utilize a 2-channel infrared control system also exist). Small fixed-pitch helicopters use a 4-channel radio (throttle, elevator, aileron, rudder); while collective-pitch models need a minimum of 5 channels (throttle, collective pitch ...
In 1943, primary investor G & J Weir Ltd. revived the moribund Cierva Autogiro Company to develop an experimental helicopter to Air Ministry Specification E.16/43. The W.9 was to investigate James G. Weir's contention that a powered tilting hub-controlled rotor with automatic collective pitch control, and torque reaction control using jet efflux, was both safer and more efficient than the ...
A helicopter has four flight control inputs. These are the cyclic, the collective, the anti-torque pedals, and the throttle. The cyclic control is usually located between the pilot's legs and is commonly called the cyclic stick or just cyclic. On most helicopters, the cyclic is similar to a joystick.
The signs of VRS are a vibration in the main rotor system [8] followed by an increasing sink rate and possibly a decrease of cyclic authority. [9]In single rotor helicopters, the vortex ring state is traditionally corrected by slightly lowering the collective to regain cyclic authority and using the cyclic control to apply lateral motion, often pitching the nose down to establish forward flight.