Search results
Results From The WOW.Com Content Network
The official name for .223 Remington in the US Army is cartridge 5.56x45mm ball, M193. If a 5.56×45mm NATO cartridge is loaded into a chamber intended to use .223 Remington, the bullet will be in contact with the rifling and the forcing cone is very tight. This generates a much higher pressure than .223 Remington chambers are designed for. [3]
The major dimensional difference between the chambers that fire the .223 Remington and the 5.56×45mm NATO is the longer and larger-diameter "freebore" [3] in the 5.56 chamber (0.0566 in (1.44 mm) vs 0.0250 in (0.64 mm) length, 0.2265 in (5.75 mm) vs 0.2240 in (5.69 mm) diameter). Freebore is a short and smooth section of the barrel that is ...
The cases tend to have similar case capacity when measured, with variations chiefly due to brand, not 5.56 vs .223 designation. The result of this is that there is no such thing as "5.56 brass" or ".223 brass", the differences in the cartridges lie in pressure ratings and in chamber leade length, not in the shape or thickness of the brass. [59 ...
The AR-15 rifle usually comes chambered for either the military cartridge 5.56×45mm or the .223 Remington. Because of the pressures associated with the 5.56×45mm, it is not advisable to fire 5.56×45mm rounds in an AR-15 marked as .223 Remington, since this can result in damage to the rifle or injury to the shooter. [1]
Other benefits of the SAAMI conformal transducer are: very adaptive to the high volume quality control testing demands of commercial and law enforcement ammunition production; protection of the transducer from direct exposure to the high temperature combustion gases and hence a comparatively long service life; 80,000 psi (551.6 MPa) maximum ...
Pressure recorded in NATO design EPVAT Barrel with Kistler 6215 Transducer, HPI GP6 Transducer or by equipment to C.I.P. requirements 9 mm (9×19mm NATO) Designed to chamber NATO ammunition: 252.0 / (36,550) 315.0 / (45,687) Pressure recorded in C.I.P. design barrel at mid-case position 12.7 mm (12.7×99mm NATO) Designed to chamber NATO ammunition
Militarized .223 Rem. 5.56×45mm NATO SS109: 1979 ... [5] 56.72mm Same cartridge as .244 Remington and interchangeable. ... Bullet diameter and chamber pressure were ...
In 1968 Günter Frères developed the parent case, the rimmed 5.6×50mmR Magnum (designated 5,6 x 50 R Mag. by the C.I.P. According to the official C.I.P ruling, the rimless 5.6×50mm Magnum can handle up to 380.00 MPa (55,114 psi) P max piezo pressure, which is 40.00 MPa (5,802 psi) more than the rimmed parent case developed four years prior.