Ads
related to: 1 8 inch deep socket
Search results
Results From The WOW.Com Content Network
Pass-through sockets and ratchets are built for 1 ⁄ 4-inch, 3 ⁄ 8-inch and 1 ⁄ 2-inch sets in both SAE and metric sizes. By using a fine tooth ratchet and socket system that allow a pass-through ratchet to be used as a conventional ratchet handle with interchangeable 1 ⁄ 4-inch and 3 ⁄ 8-inch drives some ratchets can be used with ...
A two-pin version, known to the telecom industry as a "310 connector", consists of two 1 ⁄ 4-inch phone plugs at a centre spacing of 5 ⁄ 8 inch (16 mm). The socket versions of these can be used with normal phone plugs provided the plug bodies are not too large, but the plug version will only mate with two sockets at 5 ⁄ 8 inches centre ...
All NEMA 1 devices are two-wire non-grounding devices (hot-neutral) rated for 125 V maximum. 1-15P plugs have two parallel flat blades, 1 ⁄ 4 inch (6.4 mm) wide, 0.06 inches (1.5 mm) thick, 5 ⁄ 8 – 23 ⁄ 32 inch (15.9–18.3 mm) long, and spaced 1 ⁄ 2 inch (12.7 mm) apart. 1-15R receptacles have been prohibited in new construction in ...
Spline socket driver sizes [1] Driver size in mm flutes in mm flutes 0.033 0.84: ... a Torx T25/slot Dual Drive screw; at left, a 3 ⁄ 16-inch (4.8 mm) flat-blade ...
The male plug has a center pin that is 1 ⁄ 8 inch (3.175 mm) in diameter, and is surrounded by an outer shell that is 1 ⁄ 3 inch (8.47 mm) in diameter. Disadvantages [ edit ]
A lightbulb socket, lightbulb holder, light socket, ... So a T12 fluorescent is 12 ⁄ 8 of an inch in diameter or 12 ⁄ 8 = 1.50" T4 – 4/8 or 0.500 in (12.7 mm ...