Search results
Results From The WOW.Com Content Network
In sharp contrast, the period between 14,300 and 11,100 years ago, which includes the Younger Dryas interval, was an interval of reduced sea level rise at about 6.0–9.9 mm/yr. Meltwater pulse 1C was centered at 8,000 years ago and produced a rise of 6.5 m in less than 140 years, such that sea levels 5000 years ago were around 3m lower than ...
Standard sea-level conditions (SSL), [1] also known as sea-level standard (SLS), defines a set of atmospheric conditions for physical calculations. The term "standard sea level " is used to indicate that values of properties are to be taken to be the same as those standard at sea level, and is done to define values for use in general calculations.
For petroleum gases, the standard cubic foot (scf) is defined as one cubic foot of gas at 60 °F (288.7 K; 15.56 °C) and at normal sea level air pressure. The pressure definition differs between sources, but are all close to normal sea level air pressure.
At standard mean sea level it specifies a temperature of 15 °C (59 °F), pressure of 101,325 pascals (14.6959 psi) (1 atm), and a density of 1.2250 kilograms per cubic meter (0.07647 lb/cu ft). It also specifies a temperature lapse rate of −6.5 °C (−11.7 °F) per km (approximately −2 °C (−3.6 °F) per 1,000 ft).
Image showing sea level change during the end of the last glacial period. Meltwater pulse 1A is indicated. Meltwater pulse 1A (MWP1a) is the name used by Quaternary geologists, paleoclimatologists, and oceanographers for a period of rapid post-glacial sea level rise, between 13,500 and 14,700 years ago, during which the global sea level rose between 16 meters (52 ft) and 25 meters (82 ft) in ...
Streamflow is measured as an amount of water passing through a specific point over time. The units used in the United States are cubic feet per second, while in most other countries cubic meters per second are utilized. There are a variety of ways to measure the discharge of a stream or canal.
The units that are typically used to express discharge in streams or rivers include m 3 /s (cubic meters per second), ft 3 /s (cubic feet per second or cfs) and/or acre-feet per day. [2] A commonly applied methodology for measuring, and estimating, the discharge of a river is based on a simplified form of the continuity equation.
A common and relatively straightforward mean sea-level standard is instead a long-term average of tide gauge readings at a particular reference location. [1] The term above sea level generally refers to the height above mean sea level (AMSL). The term APSL means above present sea level, comparing sea levels in the past with the level today.