Ads
related to: is efi better than carburetor in lawn mower deck cleaner kit
Search results
Results From The WOW.Com Content Network
The system was a speed/density system, using engine speed and intake manifold air density to calculate the amount of fuel to be injected. In 1974, Bosch introduced the K-Jetronic system, which used a continuous flow of fuel from the injectors (rather than the pulsed flow of the D-Jetronic system). K-Jetronic was a mechanical injection system ...
The D-400 series engine or the Iron Horse engine was a light-duty two-stroke engine used for powering lawnmowers produced from the 1950s to the late 1970s. D-400 engines were single-cylinder engines designed and manufactured by the Outboard Marine Corporation (OMC; Johnson and Evinrude) for Lawn-Boy [2] and Masport.
Programmed Fuel Injection, or PGMFI/PGM-FI, is the name given by Honda to a proprietary digital electronic multi-point injection system for internal combustion engines.It has been available since the early 1980s.
The carburetor then feeds the fuel mixture into the crankcase through a reed valve or a rotary disk valve (driven by the engine). There are cast in ducts from the crankcase to the port in the cylinder to provide for intake and another from the exhaust port to the exhaust pipe.
Crate engines are often seen as an economical and more reliable solution as opposed to engine overhauls or custom builds. Such engines are built by specialist engine builders, working in clean and well-equipped workshops, rather than general purpose repair garages. Crate engines may be either brand new, or substantially rebuilt.
The carburetor supplies a mixture of fuel and air into the engine, with the proportions kept fairly constant and their total volume throttled to control the engine power. Apart from sharing the diesel's use of compression ignition, their construction has more in common with a small two-stroke motorcycle or lawnmower engine.
A stratified charge can allow for slightly higher compression ratios without "knock," and leaner air/fuel ratio than in conventional internal combustion engines. Conventionally, a four-stroke (petrol or gasoline) Otto cycle engine is fueled by drawing a mixture of air and fuel into the combustion chamber during the intake stroke.
The basic operation of a feedback carburetor: The carburetor would take in a signal from the oxygen sensor and would determine if the mixture was correct; If the mixture needed to be adjusted, a solenoid or stepper motor would move to adjust the AFR; Most included electric chokes for cold starting