Search results
Results From The WOW.Com Content Network
Aluminium–copper alloys (AlCu) are aluminium alloys that consist largely of aluminium (Al) and traces of copper (Cu) as the main alloying elements.Important grades also contain additives of magnesium, iron, nickel and silicon (AlCu(Mg, Fe, Ni, Si)), often manganese is also included to increase strength (see aluminium-manganese alloys).
A UNS number only defines a specific chemical composition, it does not provided full material specification. Requirements such as material properties (yield strength, ultimate strength, hardness, etc.), heat treatment, form (rolled, cast, forged, flanges, tubes, bars, etc.), purpose (high temperature, boilers and pressure vessels, etc.) and testing methods are all specified in the material or ...
The water in the air actually sticks to the alumina itself in between the tiny passages as the air passes through them. The water molecules become trapped so that the air is dried out as it passes through the filter. This process is reversible. If the alumina desiccant is heated to ~200 °C, it will release the trapped water.
After some time, graphite refractory in contact with aluminium will react to create aluminum carbides (harder and more detrimental inclusions). In aluminium alloy containing magnesium , the magnesium reacts with some refractories to create rather big and hard inclusions similar to spinels.
Aluminized steel is more resistant to corrosion than bare steel [1] while retaining properties of steel, at temperature lower than the melting point of aluminum, 800 °C (1,470 °F). Common applications include heat exchangers in residential furnaces, commercial rooftop HVAC units, automotive mufflers , ovens, kitchen ranges, water heaters ...
These alloys are used for boat building and shipbuilding, and other marine and salt-water sensitive shore applications. [70] 5052 aluminium alloy; 5059 aluminium alloy; 5083 aluminium alloy; 5086 aluminium alloy; 6061 aluminium alloy; 6063 aluminium alloy; 4043, 5183, 6005A, 6082 also used in marine constructions and off shore applications.
Aluminum-silicon phase diagram. Aluminum forms a eutectic with silicon, which is at 577 °C, with a Si content of 12.5% [7] or 12.6%. [8] Up to 1.65% Si can be dissolved in aluminum at this temperature. However, the solubility decreases rapidly with temperature. At 500 °C it is still 0.8% Si, at 400 °C 0.3% Si and at 250 °C only 0.05% Si.
Aluminium–manganese alloys (AlMn alloys) are aluminium alloys that contain manganese (Mn) as the main alloying element. They consist mainly of aluminium (Al); in addition to manganese, which accounts for the largest proportion of about 1% of the alloying elements, but they may also contain small amounts of iron (Fe), silicon (Si), magnesium (Mg), or copper (Cu).