Search results
Results From The WOW.Com Content Network
A diameter tape (D-tape) is a measuring tape used to estimate the diameter of a cylinder object, typically the stem of a tree or pipe. A diameter tape has either metric or imperial measurements reduced by the value of π. This means the tape measures the diameter of the object. It is assumed that the cylinder object is a perfect circle.
This feature gives the taper tap a very gradual cutting action that is less aggressive than that of the plug tap. The number of tapered threads typically ranges from 8 to 10. [2] A taper tap is most often used when the material is difficult to work (e.g., alloy steel) or the tap is of a very small diameter and thus prone to breakage. Power taps
Make your life easier with a tape gun. An essential item for any work space or home, tape guns make sealing boxes a simple task. Invented in 1932 by an engineer at the 3M Company (which remains ...
The planned difference between the drill diameter and the reamer diameter is called an allowance. (It allows for the removal of a certain small amount of material.) The allowance should be < 0.2 mm (.008 in) for soft materials and < 0.13 mm (.005 in) for hard materials. Larger allowances can damage the reamer.
Dicing tape can be made of PVC, polyolefin, or polyethylene backing material with an adhesive to hold the wafer or substrate in place. In some cases dicing tape will have a release liner that will be removed prior to mounting the tape to the backside of the wafers, with a variety of adhesive strengths, designed for various wafer/substrate sizes and materials.
Prior to the development of the tape dispenser, 3M's standard clear scotch tape was sold as a roll, and had to be carefully peeled from the end and cut with scissors. To make the product more useful, the scotch tape sales manager at 3M, John Borden, designed the first tape dispenser in 1932, which had a built-in cutting mechanism and would hold the cut end of the tape until its next use.
Self-tapping screws can be divided into two classes: [3] those that displace material (especially plastic and thin metal sheets) without removing it, known as "thread-forming" self-tapping screws, and self-tappers with sharp cutting surfaces that remove the material as they are inserted, termed "thread-cutting" self-tapping screws.
These cutting tools are held stationary by what is known as a tool post, which is what manipulates the tools to cut the material into the desired shape. Single-edge cutting tools are also the means of cutting material performed by shaping machines and planing machines, which remove material by means of one cutting edge.